Jayant Impex Private Limited
Jayant Impex Private Limited
Send Email
0804861817083% Response Rate
Search

Home » Our Products » Stainless Steel 400 Series Bars, Rods


Stainless Steel 400 Series Bars, Rods

Stainless Steel 400 Series Bars & Rods for manufacturing fasteners, bolta, studs, nuts, screws, etc.

ASTM A437/A437M B4B Stainless Steel Round Bar, Rods, Bars(Precipitation Hardening, Turbine Bolting)

REQUEST CALLBACK

ASTM A437/A437M B4B Stainless Steel Round Bar, Rods, Bars(Precipitation Hardening, Turbine Bolting)
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 691 / KgGet Latest Price

Product Details:
Material GradeASTM A437/A437M B4B
Size10 to 400mm
ShapeRound
Single Piece Length3 meter
Usage/ApplicationManufacturing
BrandJIPL
Test CertificateNabl
Thickness/Diameter2-3 inch, 0-1 inch, 1-2 inch
Properties 1ASTM A437/A437M B4B Chemical Composition, ASTM A437/A437M B4B Chemistry

ASTM A437/A437M B4B Stainless Steel Round Bar, Rods, Bars(Precipitation Hardening, Turbine Bolting)

Tradewell Ferromet 
can offer VACUUM DEGASSING (VD) route Stainless SteelASTM A437 B4B Round Bars, ASTM A437 B4B Round Forged Bars, ASTM A437 B4B Forged Rods, ASTM A437 B4B Black Round Bars, Bright Round Bars, ASTM A437 B4B Rolled Round Bars, ASTM A437 B4B Peeled Round Bars, ASTM A437 B4B Proof Machined Round Bars, ASTM A437 B4B Threaded Round Bars, ASTM A437 B4B Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for ASTM A437 B4B Round Bars: 6mm upto 1200mm

Length for ASTM A437 B4B Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of ASTM A437 B4B Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for ASTM A437 B4B Round Bars: Bright & Black

ASTM A437 B4B Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel ASTM A437 B4B Round Bars, ASTM A437 B4B Round Forged Bars, ASTM A437 B4B Forged Rods, ASTM A437 B4B Black Round Bars, Bright Round Bars, ASTM A437 B4B Rolled Round Bars, ASTM A437 B4B Peeled Round Bars, ASTM A437 B4B Proof Machined Round Bars, ASTM A437 B4B Threaded Round Bars, ASTM A437 B4B Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelASTM A437 B4B Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelASTM A437 B4B Round Bars, ASTM A437 B4B Round Forged Bars, ASTM A437 B4B Forged Rods, ASTM A437 B4B Black Round Bars, Bright Round Bars, ASTM A437 B4B Rolled Round Bars, ASTM A437 B4B Peeled Round Bars, ASTM A437 B4B Proof Machined Round Bars, ASTM A437 B4B Threaded Round Bars, ASTM A437 B4B Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.
ASTM A437/A437M B4B Stainless Steel Round Bar, Rods, Bars(Precipitation Hardening, Turbine Bolting)
Yes! I am interested

Alloy 422 Stainless Steel Round Bar, SAE 422 Rods, AISI 422 Bars, SS 422 Round, SS422 Bars, 422 Rod

REQUEST CALLBACK

Alloy 422 Stainless Steel Round Bar, SAE 422 Rods, AISI 422 Bars, SS 422 Round, SS422 Bars, 422 Rod
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 575 / KgGet Latest Price

Product Details:
Material GradeAlloy 422, SAE 422, AISI 422, SS 422
Size10 to 400mm
Single Piece Length3 meter
Usage/ApplicationManufacturing
ShapeRound
BrandJIPL
Thickness/Diameter1-2 inch, 2-3 inch, 0-1 inch
Ultrasonic TestAs per ASTM A388
Properties 1AISI 422 Chemical Composition, AISI 422 Chemistry, AISI 422 Steel Properties, AISI 422 Mechanical
Properties 3Alloy 422 Chemical Composition, Alloy 422 Chemistry,Alloy 422 Steel Properties,Alloy 422 Mechanical
Properties 4SS 422 Chemical Composition, SS 422 Chemistry, SS 422 Steel Properties, SS 422 Mechanical
Properties 2SAE 422 Chemical Composition, SAE 422 Chemistry, SAE 422 Steel Properties, SAE 422 Mechanical
Country of OriginMade in India

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelAISI / SAE 422 Round Bars, AISI / SAE 422 Round Forged Bars, AISI / SAE 422 Forged Rods, AISI / SAE 422 Black Round Bars, Bright Round Bars, AISI / SAE 422 Rolled Round Bars, AISI / SAE 422 Peeled Round Bars, AISI / SAE 422 Proof Machined Round Bars, AISI / SAE 422 Threaded Round Bars, AISI / SAE 422 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for AISI / SAE 422 Round Bars: 6mm upto 1200mm

Length for AISI / SAE 422 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of AISI / SAE 422 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for AISI / SAE 422 Round Bars: Bright & Black

AISI / SAE 422 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel AISI / SAE 422 Round Bars, AISI / SAE 422 Round Forged Bars, AISI / SAE 422 Forged Rods, AISI / SAE 422 Black Round Bars, Bright Round Bars, AISI / SAE 422 Rolled Round Bars, AISI / SAE 422 Peeled Round Bars, AISI / SAE 422 Proof Machined Round Bars, AISI / SAE 422 Threaded Round Bars, AISI / SAE 422 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelAISI / SAE 422 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelAISI / SAE 422 Round Bars, AISI / SAE 422 Round Forged Bars, AISI / SAE 422 Forged Rods, AISI / SAE 422 Black Round Bars, Bright Round Bars, AISI / SAE 422 Rolled Round Bars, AISI / SAE 422 Peeled Round Bars, AISI / SAE 422 Proof Machined Round Bars, AISI / SAE 422 Threaded Round Bars, AISI / SAE 422 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.
Yes! I am interested

AMS 5655 Stainless Steel Round Bar, AMS 5655 Rods, AMS 5655 Bars, AMS 5655 Circle, AMS 5655 Ring

REQUEST CALLBACK

AMS 5655 Stainless Steel Round Bar, AMS 5655 Rods, AMS 5655 Bars, AMS 5655 Circle, AMS 5655 Ring
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 695 / KgGet Latest Price

Product Details:
Material GradeAMS 5655
Size10 to 400mm
Single Piece Length3 meter
Usage/ApplicationManufacturing
ShapeRound
BrandJIPL
Thickness/Diameter1-2 inch, 0-1 inch, 2-3 inch
Properties 1AMS 5655 Chemical Property, AMS 5655 Chemical Composition, AMS 5655 Chemistry, AMS 5655 Properties
Country of OriginMade in India

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelAMS 5655 Round Bars, AMS 5655 Round Forged Bars, AMS 5655 Forged Rods, AMS 5655 Black Round Bars, Bright Round Bars, AMS 5655 Rolled Round Bars, AMS 5655 Peeled Round Bars, AMS 5655 Proof Machined Round Bars, AMS 5655 Threaded Round Bars, AMS 5655 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for AMS 5655 Round Bars: 6mm upto 1200mm

Length for AMS 5655 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of AMS 5655 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for AMS 5655 Round Bars: Bright & Black

AMS 5655 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel AMS 5655 Round Bars, AMS 5655 Round Forged Bars, AMS 5655 Forged Rods, AMS 5655 Black Round Bars, Bright Round Bars, AMS 5655 Rolled Round Bars, AMS 5655 Peeled Round Bars, AMS 5655 Proof Machined Round Bars, AMS 5655 Threaded Round Bars, AMS 5655 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelAMS 5655 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelAMS 5655 Round Bars, AMS 5655 Round Forged Bars, AMS 5655 Forged Rods, AMS 5655 Black Round Bars, Bright Round Bars, AMS 5655 Rolled Round Bars, AMS 5655 Peeled Round Bars, AMS 5655 Proof Machined Round Bars, AMS 5655 Threaded Round Bars, AMS 5655 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.
Yes! I am interested

UNS S42200 Stainless Steel Round Bar, UNS S42200 Rods, UNS S42200 Bars,UNS S42200 Round Circle Ring

REQUEST CALLBACK

UNS S42200 Stainless Steel Round Bar, UNS S42200 Rods, UNS S42200 Bars,UNS S42200 Round Circle Ring
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 856 / KgGet Latest Price

Product Details:
Material GradeUNS S42200
BrandJIPL
Usage/ApplicationManufacturing
Single Piece Length3 meter
Test CertificateNabl
Thickness/Diameter1-2 inch, 0-1 inch, 2-3 inch
Properties 1UNS S42200 Chemical Property, UNS S42200 Chemical Composition, UNS S42200 Chemistry, Properties
Country of OriginMade in India

UNS S42200 Stainless Steel Round Bar, UNS S42200 Rods, UNS S42200 Bars,UNS S42200 Round Circle Ring

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelUNS S42200 Round Bars, UNS S42200 Round Forged Bars, UNS S42200 Forged Rods, UNS S42200 Black Round Bars, Bright Round Bars, UNS S42200 Rolled Round Bars, UNS S42200 Peeled Round Bars, UNS S42200 Proof Machined Round Bars, UNS S42200 Threaded Round Bars, UNS S42200 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for UNS S42200 Round Bars: 6mm upto 1200mm

Length for UNS S42200 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of UNS S42200 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for UNS S42200 Round Bars: Bright & Black

UNS S42200 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel UNS S42200 Round Bars, UNS S42200 Round Forged Bars, UNS S42200 Forged Rods, UNS S42200 Black Round Bars, Bright Round Bars, UNS S42200 Rolled Round Bars, UNS S42200 Peeled Round Bars, UNS S42200 Proof Machined Round Bars, UNS S42200 Threaded Round Bars, UNS S42200 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelUNS S42200 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelUNS S42200 Round Bars, UNS S42200 Round Forged Bars, UNS S42200 Forged Rods, UNS S42200 Black Round Bars, Bright Round Bars, UNS S42200 Rolled Round Bars, UNS S42200 Peeled Round Bars, UNS S42200 Proof Machined Round Bars, UNS S42200 Threaded Round Bars, UNS S42200 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.
Yes! I am interested

ASTM A276 422 Stainless Steel Round Bar, ASTM A479 422 Rods, SS422 Bars,ASTM A479 Rod,ASTM A276 Bar

REQUEST CALLBACK

ASTM A276 422 Stainless Steel Round Bar, ASTM A479 422 Rods, SS422 Bars,ASTM A479 Rod,ASTM A276 Bar
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 595 / KgGet Latest Price

Product Details:
Material GradeASTM A276 422, ASTM A479 422
Single Piece Length3 meter
Size10 to 400mm
Usage/ApplicationManufacturing
ShapeRound
BrandJIPL
Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch
Properties 2ASTM A479 422 Chemical Property, ASTM A479 422 Chemical Composition, ASTM A479 422 Chemistry
Properties 1ASTM A276 422 Chemical Property, ASTM A276 422 Chemical Composition, ASTM A276 422 Chemistry
Country of OriginMade in India

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelASTM A276 / A479 422 Round Bars, ASTM A276 / A479 422 Round Forged Bars, ASTM A276 / A479 422 Forged Rods, ASTM A276 / A479 422 Black Round Bars, Bright Round Bars, ASTM A276 / A479 422 Rolled Round Bars, ASTM A276 / A479 422 Peeled Round Bars, ASTM A276 / A479 422 Proof Machined Round Bars, ASTM A276 / A479 422 Threaded Round Bars, ASTM A276 / A479 422 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for ASTM A276 / A479 422 Round Bars: 6mm upto 1200mm

Length for ASTM A276 / A479 422 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of ASTM A276 / A479 422 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for ASTM A276 / A479 422 Round Bars: Bright & Black

ASTM A276 / A479 422 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel ASTM A276 / A479 422 Round Bars, ASTM A276 / A479 422 Round Forged Bars, ASTM A276 / A479 422 Forged Rods, ASTM A276 / A479 422 Black Round Bars, Bright Round Bars, ASTM A276 / A479 422 Rolled Round Bars, ASTM A276 / A479 422 Peeled Round Bars, ASTM A276 / A479 422 Proof Machined Round Bars, ASTM A276 / A479 422 Threaded Round Bars, ASTM A276 / A479 422 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelASTM A276 / A479 422 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelASTM A276 / A479 422 Round Bars, ASTM A276 / A479 422 Round Forged Bars, ASTM A276 / A479 422 Forged Rods, ASTM A276 / A479 422 Black Round Bars, Bright Round Bars, ASTM A276 / A479 422 Rolled Round Bars, ASTM A276 / A479 422 Peeled Round Bars, ASTM A276 / A479 422 Proof Machined Round Bars, ASTM A276 / A479 422 Threaded Round Bars, ASTM A276 / A479 422 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Yes! I am interested

BS 970 442S19 Stainless Steel Round Bar, BS 970 442S19 Rods & BS 970 442S19 Bars, Circle Ring

REQUEST CALLBACK

BS 970 442S19 Stainless Steel Round Bar, BS 970 442S19 Rods & BS 970 442S19 Bars, Circle Ring
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 788 / KgGet Latest Price

Product Details:
Material GradeBS 970 442S19
Size10 to 400mm
ShapeRound
Usage/ApplicationManufacturing
Single Piece Length3 meter
BrandJIPL
Test CertificateNabl
Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch
Properties 1BS 970 442S19 Chemical Property, BS 970 442S19 Chemical Composition, BS 970 442S19 Chemistry

BS 970 442S19 Stainless Steel Round Bar, BS 970 442S19 Rods & BS 970 442S19 Bars, Circle Ring

 

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelBS 970; 442S19 Round Bars, BS 970; 442S19 Round Forged Bars, BS 970; 442S19 Forged Rods, BS 970; 442S19 Black Round Bars, Bright Round Bars, BS 970; 442S19 Rolled Round Bars, BS 970; 442S19 Peeled Round Bars, BS 970; 442S19 Proof Machined Round Bars, BS 970; 442S19 Threaded Round Bars, BS 970; 442S19 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for BS 970; 442S19 Round Bars: 6mm upto 1200mm

Length for BS 970; 442S19 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of BS 970; 442S19 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for BS 970; 442S19 Round Bars: Bright & Black

BS 970; 442S19 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel BS 970; 442S19 Round Bars, BS 970; 442S19 Round Forged Bars, BS 970; 442S19 Forged Rods, BS 970; 442S19 Black Round Bars, Bright Round Bars, BS 970; 442S19 Rolled Round Bars, BS 970; 442S19 Peeled Round Bars, BS 970; 442S19 Proof Machined Round Bars, BS 970; 442S19 Threaded Round Bars, BS 970; 442S19 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelBS 970; 442S19 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelBS 970; 442S19 Round Bars, BS 970; 442S19 Round Forged Bars, BS 970; 442S19 Forged Rods, BS 970; 442S19 Black Round Bars, Bright Round Bars, BS 970; 442S19 Rolled Round Bars, BS 970; 442S19 Peeled Round Bars, BS 970; 442S19 Proof Machined Round Bars, BS 970; 442S19 Threaded Round Bars, BS 970; 442S19 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.
Yes! I am interested

ASTM A565 GR. 616 Stainless Steel Round Bar, ASTM A565 GR. 616 Rods, ASTM A565 GR. 616 Bars, Ring

REQUEST CALLBACK

ASTM A565 GR. 616 Stainless Steel Round Bar, ASTM A565 GR. 616 Rods, ASTM A565 GR. 616 Bars, Ring
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 795 / KgGet Latest Price

Product Details:
Material GradeASTM A565 GR. 616
Size10 to 400mm
ShapeRound
Single Piece Length6 meter
Usage/ApplicationManufacturing
Test CertificateNabl
BrandJIPL
Thickness/Diameter1-2 inch, 0-1 inch, 2-3 inch
Properties 1ASTM A565 GR. 616 Chemical Property, ASTM A565 GR. 616 Chemical Composition, ASTM A565 GR. 616
Properties 2ASTM A565 GR. 616 Chemistry, ASTM A565 GR. 616 Properties
Country of OriginMade in India

ASTM A565 GR. 616 Stainless Steel Round Bar, ASTM A565 GR. 616 Rods, ASTM A565 GR. 616 Bars, Ring

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelASTM A565 GR. 616 Round Bars, ASTM A565 GR. 616 Round Forged Bars, ASTM A565 GR. 616 Forged Rods, ASTM A565 GR. 616 Black Round Bars, Bright Round Bars, ASTM A565 GR. 616 Rolled Round Bars, ASTM A565 GR. 616 Peeled Round Bars, ASTM A565 GR. 616 Proof Machined Round Bars, ASTM A565 GR. 616 Threaded Round Bars, ASTM A565 GR. 616 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for ASTM A565 GR. 616 Round Bars: 6mm upto 1200mm

Length for ASTM A565 GR. 616 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of ASTM A565 GR. 616 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for ASTM A565 GR. 616 Round Bars: Bright & Black

ASTM A565 GR. 616 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel ASTM A565 GR. 616 Round Bars, ASTM A565 GR. 616 Round Forged Bars, ASTM A565 GR. 616 Forged Rods, ASTM A565 GR. 616 Black Round Bars, Bright Round Bars, ASTM A565 GR. 616 Rolled Round Bars, ASTM A565 GR. 616 Peeled Round Bars, ASTM A565 GR. 616 Proof Machined Round Bars, ASTM A565 GR. 616 Threaded Round Bars, ASTM A565 GR. 616 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelASTM A565 GR. 616 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelASTM A565 GR. 616 Round Bars, ASTM A565 GR. 616 Round Forged Bars, ASTM A565 GR. 616 Forged Rods, ASTM A565 GR. 616 Black Round Bars, Bright Round Bars, ASTM A565 GR. 616 Rolled Round Bars, ASTM A565 GR. 616 Peeled Round Bars, ASTM A565 GR. 616 Proof Machined Round Bars, ASTM A565 GR. 616 Threaded Round Bars, ASTM A565 GR. 616 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.


Additional Information:

  • Packaging Details: Wooden Box Packing. We can supply smaller quantities of ASTM-A565-GR-616-Stainless-Steel-Round-Bar-ASTM-A565-GR-616-Rods-ASTM-A565-GR-616-Bars-Ring from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc.
Yes! I am interested

JIS SUS 422 Stainless Steel Round Bar, JIS SUS 422 Rods, JIS SUS 422 Bars, JIS SUS 422 Circle Ring

REQUEST CALLBACK

JIS SUS 422 Stainless Steel Round Bar, JIS SUS 422 Rods, JIS SUS 422 Bars, JIS SUS 422 Circle Ring
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 588 / KgGet Latest Price

Product Details:
Material GradeJIS SUS 422
Size10 to 400mm
Single Piece Length3 meter
Usage/ApplicationIndustrial
ShapeRound
BrandJIPL
Thickness/Diameter2-3 inch, 1-2 inch, 0-1 inch
Properties 1JIS SUS 422 Chemical Property, JIS SUS 422 Chemical Composition, JIS SUS 422 Chemistry, JIS SUS 422
Country of OriginMade in India

JIS SUS 422 Stainless Steel Round Bar, JIS SUS 422 Rods, JIS SUS 422 Bars, JIS SUS 422 Circle Ring

 

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelJIS SUS 422 Round Bars, JIS SUS 422 Round Forged Bars, JIS SUS 422 Forged Rods, JIS SUS 422 Black Round Bars, Bright Round Bars, JIS SUS 422 Rolled Round Bars, JIS SUS 422 Peeled Round Bars, JIS SUS 422 Proof Machined Round Bars, JIS SUS 422 Threaded Round Bars, JIS SUS 422 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for JIS SUS 422 Round Bars: 6mm upto 1200mm

Length for JIS SUS 422 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of JIS SUS 422 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for JIS SUS 422 Round Bars: Bright & Black

JIS SUS 422 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel JIS SUS 422 Round Bars, JIS SUS 422 Round Forged Bars, JIS SUS 422 Forged Rods, JIS SUS 422 Black Round Bars, Bright Round Bars, JIS SUS 422 Rolled Round Bars, JIS SUS 422 Peeled Round Bars, JIS SUS 422 Proof Machined Round Bars, JIS SUS 422 Threaded Round Bars, JIS SUS 422 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelJIS SUS 422 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelJIS SUS 422 Round Bars, JIS SUS 422 Round Forged Bars, JIS SUS 422 Forged Rods, JIS SUS 422 Black Round Bars, Bright Round Bars, JIS SUS 422 Rolled Round Bars, JIS SUS 422 Peeled Round Bars, JIS SUS 422 Proof Machined Round Bars, JIS SUS 422 Threaded Round Bars, JIS SUS 422 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.



Additional Information:

  • Packaging Details: Wooden Box Packing. We can supply smaller quantities of JIS-SUS-422-Stainless-Steel-Round-Bar-JIS-SUS-422-Rods-JIS-SUS-422-Bars-JIS-SUS-422-Circle-Ring from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc.
Yes! I am interested

DIN 1.4935 Stainless Steel Round Bar, DIN 1.4935 Rods, DIN 1.4935 Bars,DIN 1.4935 Blank Circle Ring

REQUEST CALLBACK

DIN 1.4935 Stainless Steel Round Bar, DIN 1.4935 Rods, DIN 1.4935 Bars,DIN 1.4935 Blank Circle Ring
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 855 / KgGet Latest Price

Product Details:
Material GradeDIN 1.4935
Size10 to 400mm
Single Piece Length3 meter
Usage/ApplicationManufacturing
ShapeRound
BrandJIPL
Thickness/Diameter1-2 inch, 2-3 inch, 0-1 inch
Properties 1DIN 1.4935 Chemical Property, DIN 1.4935 Chemical Composition, DIN 1.4935 Chemistry, Properties
Country of OriginMade in India

DIN 1.4935 Stainless Steel Round Bar, DIN 1.4935 Rods, DIN 1.4935 Bars,DIN 1.4935 Blank Circle Ring

 

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelDIN 1.4935 Round Bars, DIN 1.4935 Round Forged Bars, DIN 1.4935 Forged Rods, DIN 1.4935 Black Round Bars, Bright Round Bars, DIN 1.4935 Rolled Round Bars, DIN 1.4935 Peeled Round Bars, DIN 1.4935 Proof Machined Round Bars, DIN 1.4935 Threaded Round Bars, DIN 1.4935 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for DIN 1.4935 Round Bars: 6mm upto 1200mm

Length for DIN 1.4935 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of DIN 1.4935 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for DIN 1.4935 Round Bars: Bright & Black

DIN 1.4935 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel DIN 1.4935 Round Bars, DIN 1.4935 Round Forged Bars, DIN 1.4935 Forged Rods, DIN 1.4935 Black Round Bars, Bright Round Bars, DIN 1.4935 Rolled Round Bars, DIN 1.4935 Peeled Round Bars, DIN 1.4935 Proof Machined Round Bars, DIN 1.4935 Threaded Round Bars, DIN 1.4935 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelDIN 1.4935 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelDIN 1.4935 Round Bars, DIN 1.4935 Round Forged Bars, DIN 1.4935 Forged Rods, DIN 1.4935 Black Round Bars, Bright Round Bars, DIN 1.4935 Rolled Round Bars, DIN 1.4935 Peeled Round Bars, DIN 1.4935 Proof Machined Round Bars, DIN 1.4935 Threaded Round Bars, DIN 1.4935 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.
Yes! I am interested

GE B50A125E Stainless Steel Round Bar, GE B50A125E Rods, GE B50A125E Bars, GE B50A125E Circle Rings

REQUEST CALLBACK

GE B50A125E Stainless Steel Round Bar, GE B50A125E Rods, GE B50A125E Bars, GE B50A125E Circle Rings
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 895 / KgGet Latest Price

Product Details:
Material GradeGE B50A125E
BrandJIPL
Usage/ApplicationManufacturing
Single Piece Length3 meter
Test CertificateNabl
FinishBlack, Bright
Thickness/Diameter1-2 inch, 2-3 inch, 0-1 inch
Properties 1GE B50A125E Chemical Property, GE B50A125E Chemical Composition, GE B50A125E Chemistry, Properties
Country of OriginMade in India

GE B50A125E Stainless Steel Round Bar, GE B50A125E Rods, GE B50A125E Bars, GE B50A125E Circle Rings

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelGE B50A125E Round Bars, GE B50A125E Round Forged Bars, GE B50A125E Forged Rods, GE B50A125E Black Round Bars, Bright Round Bars, GE B50A125E Rolled Round Bars, GE B50A125E Peeled Round Bars, GE B50A125E Proof Machined Round Bars, GE B50A125E Threaded Round Bars, GE B50A125E Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for GE B50A125E Round Bars: 6mm upto 1200mm

Length for GE B50A125E Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of GE B50A125E Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for GE B50A125E Round Bars: Bright & Black

GE B50A125E Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel GE B50A125E Round Bars, GE B50A125E Round Forged Bars, GE B50A125E Forged Rods, GE B50A125E Black Round Bars, Bright Round Bars, GE B50A125E Rolled Round Bars, GE B50A125E Peeled Round Bars, GE B50A125E Proof Machined Round Bars, GE B50A125E Threaded Round Bars, GE B50A125E Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelGE B50A125E Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelGE B50A125E Round Bars, GE B50A125E Round Forged Bars, GE B50A125E Forged Rods, GE B50A125E Black Round Bars, Bright Round Bars, GE B50A125E Rolled Round Bars, GE B50A125E Peeled Round Bars, GE B50A125E Proof Machined Round Bars, GE B50A125E Threaded Round Bars, GE B50A125E Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.
Yes! I am interested

SAE 51422 Stainless Steel Round Bar, SAE 51422 Rods & SAE 51422 Bars, SAE 51422 Blank Circle Rings

REQUEST CALLBACK

SAE 51422 Stainless Steel Round Bar, SAE 51422 Rods & SAE 51422 Bars, SAE 51422 Blank Circle Rings
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 755 / PieceGet Latest Price

Product Details:
Material GradeSAE 51422
Single Piece Length3 meter
Size10 to 400mm
ShapeRound
Usage/ApplicationManufacturing
BrandJIPL
Thickness/Diameter1-2 inch, 2-3 inch, 0-1 inch
Properties 1SAE 51422 Chemical Property, SAE 51422 Chemical Composition,SAE 51422 Chemistry,SAE 51422 Properties
Country of OriginMade in India

SAE 51422 Stainless Steel Round Bar, SAE 51422 Rods & SAE 51422 Bars, SAE 51422 Blank Circle Rings

 

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelSAE 51422 Round Bars, SAE 51422 Round Forged Bars, SAE 51422 Forged Rods, SAE 51422 Black Round Bars, Bright Round Bars, SAE 51422 Rolled Round Bars, SAE 51422 Peeled Round Bars, SAE 51422 Proof Machined Round Bars, SAE 51422 Threaded Round Bars, SAE 51422 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for SAE 51422 Round Bars: 6mm upto 1200mm

Length for SAE 51422 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of SAE 51422 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for SAE 51422 Round Bars: Bright & Black

SAE 51422 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel SAE 51422 Round Bars, SAE 51422 Round Forged Bars, SAE 51422 Forged Rods, SAE 51422 Black Round Bars, Bright Round Bars, SAE 51422 Rolled Round Bars, SAE 51422 Peeled Round Bars, SAE 51422 Proof Machined Round Bars, SAE 51422 Threaded Round Bars, SAE 51422 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelSAE 51422 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelSAE 51422 Round Bars, SAE 51422 Round Forged Bars, SAE 51422 Forged Rods, SAE 51422 Black Round Bars, Bright Round Bars, SAE 51422 Rolled Round Bars, SAE 51422 Peeled Round Bars, SAE 51422 Proof Machined Round Bars, SAE 51422 Threaded Round Bars, SAE 51422 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.
Yes! I am interested

En / Afnor X20crmowv12-1 Stainless Steel Round Bar, X20crmowv12-1 Rods, X20crmowv12-1 Bars, Rings

REQUEST CALLBACK

En / Afnor X20crmowv12-1 Stainless Steel Round Bar, X20crmowv12-1 Rods, X20crmowv12-1 Bars, Rings
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 745 / KgGet Latest Price

Product Details:
Material GradeEN X20CRMOWV12-1, AFNOR X20CRMOWV12-1
Size10 to 400mm
Single Piece Length3 meter
Usage/ApplicationManufacturing
ShapeRound
BrandJIPL
Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch
Properties 1X20CRMOWV12-1 Chemical Property, X20CRMOWV12-1 Chemical Composition, X20CRMOWV12-1 Chemistry
Properties 2EN / AFNOR X20CRMOWV12-1 Chemistry, X20CRMOWV12-1 Properties
Country of OriginMade in India

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelEN / AFNOR X20CRMOWV12-1 Round Bars, EN / AFNOR X20CRMOWV12-1 Round Forged Bars, EN / AFNOR X20CRMOWV12-1 Forged Rods, EN / AFNOR X20CRMOWV12-1 Black Round Bars, Bright Round Bars, EN / AFNOR X20CRMOWV12-1 Rolled Round Bars, EN / AFNOR X20CRMOWV12-1 Peeled Round Bars, EN / AFNOR X20CRMOWV12-1 Proof Machined Round Bars, EN / AFNOR X20CRMOWV12-1 Threaded Round Bars, EN / AFNOR X20CRMOWV12-1 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for EN / AFNOR X20CRMOWV12-1 Round Bars: 6mm upto 1200mm

Length for EN / AFNOR X20CRMOWV12-1 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of EN / AFNOR X20CRMOWV12-1 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for EN / AFNOR X20CRMOWV12-1 Round Bars: Bright & Black

EN / AFNOR X20CRMOWV12-1 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel EN / AFNOR X20CRMOWV12-1 Round Bars, EN / AFNOR X20CRMOWV12-1 Round Forged Bars, EN / AFNOR X20CRMOWV12-1 Forged Rods, EN / AFNOR X20CRMOWV12-1 Black Round Bars, Bright Round Bars, EN / AFNOR X20CRMOWV12-1 Rolled Round Bars, EN / AFNOR X20CRMOWV12-1 Peeled Round Bars, EN / AFNOR X20CRMOWV12-1 Proof Machined Round Bars, EN / AFNOR X20CRMOWV12-1 Threaded Round Bars, EN / AFNOR X20CRMOWV12-1 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelEN / AFNOR X20CRMOWV12-1 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelEN / AFNOR X20CRMOWV12-1 Round Bars, EN / AFNOR X20CRMOWV12-1 Round Forged Bars, EN / AFNOR X20CRMOWV12-1 Forged Rods, EN / AFNOR X20CRMOWV12-1 Black Round Bars, Bright Round Bars, EN / AFNOR X20CRMOWV12-1 Rolled Round Bars, EN / AFNOR X20CRMOWV12-1 Peeled Round Bars, EN / AFNOR X20CRMOWV12-1 Proof Machined Round Bars, EN / AFNOR X20CRMOWV12-1 Threaded Round Bars, EN / AFNOR X20CRMOWV12-1 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, etc. kindly do contact us.

Yes! I am interested

DIN 1.4929 Stainless Steel Round Bar, DIN 1.4929 Rods, DIN 1.4929 Bars,DIN 1.4929 Blank Circle Ring

REQUEST CALLBACK

DIN 1.4929 Stainless Steel Round Bar, DIN 1.4929 Rods, DIN 1.4929 Bars,DIN 1.4929 Blank Circle Ring
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 725 / PieceGet Latest Price

Product Details:
Material GradeDIN 1.4929
Size10 to 400mm
Single Piece Length3 meter
Usage/ApplicationManufacturing
ShapeRound
BrandJIPL
Thickness/Diameter1-2 inch, 2-3 inch, 0-1 inch
Properties 1DIN 1.4929 Chemical Property, DIN 1.4929 Chemical Composition, DIN 1.4929 Chemistry, Properties
Country of OriginMade in India

DIN 1.4929 Stainless Steel Round Bar, DIN 1.4929 Rods, DIN 1.4929 Bars,DIN 1.4929 Blank Circle Ring

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelDIN 1.4929 Round Bars, DIN 1.4929 Round Forged Bars, DIN 1.4929 Forged Rods, DIN 1.4929 Black Round Bars, Bright Round Bars, DIN 1.4929 Rolled Round Bars, DIN 1.4929 Peeled Round Bars, DIN 1.4929 Proof Machined Round Bars, DIN 1.4929 Threaded Round Bars, DIN 1.4929 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for DIN 1.4929 Round Bars: 6mm upto 1200mm

Length for DIN 1.4929 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of DIN 1.4929 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for DIN 1.4929 Round Bars: Bright & Black

DIN 1.4929 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel DIN 1.4929 Round Bars, DIN 1.4929 Round Forged Bars, DIN 1.4929 Forged Rods, DIN 1.4929 Black Round Bars, Bright Round Bars, DIN 1.4929 Rolled Round Bars, DIN 1.4929 Peeled Round Bars, DIN 1.4929 Proof Machined Round Bars, DIN 1.4929 Threaded Round Bars, DIN 1.4929 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelDIN 1.4929 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelDIN 1.4929 Round Bars, DIN 1.4929 Round Forged Bars, DIN 1.4929 Forged Rods, DIN 1.4929 Black Round Bars, Bright Round Bars, DIN 1.4929 Rolled Round Bars, DIN 1.4929 Peeled Round Bars, DIN 1.4929 Proof Machined Round Bars, DIN 1.4929 Threaded Round Bars, DIN 1.4929 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.
Yes! I am interested

EN X23CRMOWMNNIV12-1-1 Stainless Steel Round Bar, X23CRMOWMNNIV12-1-1 Rods,X23CRMOWMNNIV12-1-1 Bars

REQUEST CALLBACK

EN X23CRMOWMNNIV12-1-1 Stainless Steel Round Bar, X23CRMOWMNNIV12-1-1 Rods,X23CRMOWMNNIV12-1-1 Bars
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 895 / KgGet Latest Price

Product Details:
Material GradeEN X23CRMOWMNNIV12-1-1
Size10 to 400mm
Single Piece Length3 meter
Usage/ApplicationManufacturing
ShapeRound
BrandJIPL
Thickness/Diameter2-3 inch, 0-1 inch, 1-2 inch
Properties 2EN X23CRMOWMNNIV12-1-1 Chemistry, EN X23CRMOWMNNIV12-1-1 Properties
Properties 1EN X23CRMOWMNNIV12-1-1 Chemical Property, EN X23CRMOWMNNIV12-1-1 Chemical Composition
Country of OriginMade in India

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelEN X23CRMOWMNNIV12-1-1 Round Bars, EN X23CRMOWMNNIV12-1-1 Round Forged Bars, EN X23CRMOWMNNIV12-1-1 Forged Rods, EN X23CRMOWMNNIV12-1-1 Black Round Bars, Bright Round Bars, EN X23CRMOWMNNIV12-1-1 Rolled Round Bars, EN X23CRMOWMNNIV12-1-1 Peeled Round Bars, EN X23CRMOWMNNIV12-1-1 Proof Machined Round Bars, EN X23CRMOWMNNIV12-1-1 Threaded Round Bars, EN X23CRMOWMNNIV12-1-1 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for EN X23CRMOWMNNIV12-1-1 Round Bars: 6mm upto 1200mm

Length for EN X23CRMOWMNNIV12-1-1 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of EN X23CRMOWMNNIV12-1-1 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for EN X23CRMOWMNNIV12-1-1 Round Bars: Bright & Black

EN X23CRMOWMNNIV12-1-1 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel EN X23CRMOWMNNIV12-1-1 Round Bars, EN X23CRMOWMNNIV12-1-1 Round Forged Bars, EN X23CRMOWMNNIV12-1-1 Forged Rods, EN X23CRMOWMNNIV12-1-1 Black Round Bars, Bright Round Bars, EN X23CRMOWMNNIV12-1-1 Rolled Round Bars, EN X23CRMOWMNNIV12-1-1 Peeled Round Bars, EN X23CRMOWMNNIV12-1-1 Proof Machined Round Bars, EN X23CRMOWMNNIV12-1-1 Threaded Round Bars, EN X23CRMOWMNNIV12-1-1 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelEN X23CRMOWMNNIV12-1-1 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelEN X23CRMOWMNNIV12-1-1 Round Bars, EN X23CRMOWMNNIV12-1-1 Round Forged Bars, EN X23CRMOWMNNIV12-1-1 Forged Rods, EN X23CRMOWMNNIV12-1-1 Black Round Bars, Bright Round Bars, EN X23CRMOWMNNIV12-1-1 Rolled Round Bars, EN X23CRMOWMNNIV12-1-1 Peeled Round Bars, EN X23CRMOWMNNIV12-1-1 Proof Machined Round Bars, EN X23CRMOWMNNIV12-1-1 Threaded Round Bars, EN X23CRMOWMNNIV12-1-1 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.
Yes! I am interested

AISI HNV-8 Stainless Steel Round Bar, SAE HNV-8 Rods, HNV-8 Bars, HNV-8 Circle, HNV-8 Blank Rings

REQUEST CALLBACK

AISI HNV-8 Stainless Steel Round Bar, SAE HNV-8 Rods, HNV-8 Bars, HNV-8 Circle, HNV-8 Blank Rings
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 726 / KgGet Latest Price

Product Details:
Material GradeAISI HNV-8, SAE HNV-8
Size10 to 400mm
Single Piece Length3 meter
ShapeRound
Usage/ApplicationManufacturing
BrandJIPL
Thickness/Diameter1-2 inch, 2-3 inch, 0-1 inch
Properties 1HNV-8 Chemical Property, HNV-8 Chemical Composition, HNV-8 Chemistry, HNV-8 Properties
Country of OriginMade in India

AISI HNV-8 Stainless Steel Round Bar, SAE HNV-8 Rods, HNV-8 Bars, HNV-8 Circle, HNV-8 Blank Rings

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelAISI / SAE HNV-8 Round Bars, AISI / SAE HNV-8 Round Forged Bars, AISI / SAE HNV-8 Forged Rods, AISI / SAE HNV-8 Black Round Bars, Bright Round Bars, AISI / SAE HNV-8 Rolled Round Bars, AISI / SAE HNV-8 Peeled Round Bars, AISI / SAE HNV-8 Proof Machined Round Bars, AISI / SAE HNV-8 Threaded Round Bars, AISI / SAE HNV-8 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for AISI / SAE HNV-8 Round Bars: 6mm upto 1200mm

Length for AISI / SAE HNV-8 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of AISI / SAE HNV-8 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for AISI / SAE HNV-8 Round Bars: Bright & Black

AISI / SAE HNV-8 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel AISI / SAE HNV-8 Round Bars, AISI / SAE HNV-8 Round Forged Bars, AISI / SAE HNV-8 Forged Rods, AISI / SAE HNV-8 Black Round Bars, Bright Round Bars, AISI / SAE HNV-8 Rolled Round Bars, AISI / SAE HNV-8 Peeled Round Bars, AISI / SAE HNV-8 Proof Machined Round Bars, AISI / SAE HNV-8 Threaded Round Bars, AISI / SAE HNV-8 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelAISI / SAE HNV-8 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelAISI / SAE HNV-8 Round Bars, AISI / SAE HNV-8 Round Forged Bars, AISI / SAE HNV-8 Forged Rods, AISI / SAE HNV-8 Black Round Bars, Bright Round Bars, AISI / SAE HNV-8 Rolled Round Bars, AISI / SAE HNV-8 Peeled Round Bars, AISI / SAE HNV-8 Proof Machined Round Bars, AISI / SAE HNV-8 Threaded Round Bars, AISI / SAE HNV-8 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.
Yes! I am interested

JIS SUH616 Stainless Steel Round Bar, JIS SUH616 Rods, JIS SUH616 Bars,JIS SUH616 Blank Circle Ring

REQUEST CALLBACK

JIS SUH616 Stainless Steel Round Bar, JIS SUH616 Rods, JIS SUH616 Bars,JIS SUH616 Blank Circle Ring
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 575 / PieceGet Latest Price

Product Details:
Material GradeJIS SUH616
Size10 to 400mm
Single Piece Length3 meter
Usage/ApplicationManufacturing
ShapeRound
BrandJIPL
Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch
Properties 1JIS SUH616 Chemical Property, JIS SUH616 Chemical Composition, JIS SUH616 Chemistry, Properties
Country of OriginMade in India

JIS SUH616 Stainless Steel Round Bar, JIS SUH616 Rods, JIS SUH616 Bars,JIS SUH616 Blank Circle Ring

 

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelJIS SUH616 Round Bars, JIS SUH616 Round Forged Bars, JIS SUH616 Forged Rods, JIS SUH616 Black Round Bars, Bright Round Bars, JIS SUH616 Rolled Round Bars, JIS SUH616 Peeled Round Bars, JIS SUH616 Proof Machined Round Bars, JIS SUH616 Threaded Round Bars, JIS SUH616 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for JIS SUH616 Round Bars: 6mm upto 1200mm

Length for JIS SUH616 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of JIS SUH616 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for JIS SUH616 Round Bars: Bright & Black

JIS SUH616 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel JIS SUH616 Round Bars, JIS SUH616 Round Forged Bars, JIS SUH616 Forged Rods, JIS SUH616 Black Round Bars, Bright Round Bars, JIS SUH616 Rolled Round Bars, JIS SUH616 Peeled Round Bars, JIS SUH616 Proof Machined Round Bars, JIS SUH616 Threaded Round Bars, JIS SUH616 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelJIS SUH616 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelJIS SUH616 Round Bars, JIS SUH616 Round Forged Bars, JIS SUH616 Forged Rods, JIS SUH616 Black Round Bars, Bright Round Bars, JIS SUH616 Rolled Round Bars, JIS SUH616 Peeled Round Bars, JIS SUH616 Proof Machined Round Bars, JIS SUH616 Threaded Round Bars, JIS SUH616 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Yes! I am interested

GOST 15CH12WNMF Stainless Steel Round Bar, GOST 15CH12WNMF Rods, GOST 15CH12WNMF Bars, Blank, Rings

REQUEST CALLBACK

GOST 15CH12WNMF Stainless Steel Round Bar, GOST 15CH12WNMF Rods, GOST 15CH12WNMF Bars, Blank, Rings
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 845 / KgGet Latest Price

Product Details:
Material GradeGOST 15CH12WNMF
Single Piece Length3 meter
Size10 to 400mm
Usage/ApplicationManufacturing
ShapeRound
BrandJIPL
Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch
Properties 2GOST 15CH12WNMF Chemistry,GOST 15CH12WNMF Properties
Properties 1GOST 15CH12WNMF Chemical Property,GOST 15CH12WNMF Chemical Composition,GOST 15CH12WNMF Chemistry
Country of OriginMade in India

GOST 15CH12WNMF Stainless Steel Round Bar, GOST 15CH12WNMF Rods, GOST 15CH12WNMF Bars, Blank, Rings

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelGOST 15CH12WNMF Round Bars, GOST 15CH12WNMF Round Forged Bars, GOST 15CH12WNMF Forged Rods, GOST 15CH12WNMF Black Round Bars, Bright Round Bars, GOST 15CH12WNMF Rolled Round Bars, GOST 15CH12WNMF Peeled Round Bars, GOST 15CH12WNMF Proof Machined Round Bars, GOST 15CH12WNMF Threaded Round Bars, GOST 15CH12WNMF Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for GOST 15CH12WNMF Round Bars: 6mm upto 1200mm

Length for GOST 15CH12WNMF Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of GOST 15CH12WNMF Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for GOST 15CH12WNMF Round Bars: Bright & Black

GOST 15CH12WNMF Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel GOST 15CH12WNMF Round Bars, GOST 15CH12WNMF Round Forged Bars, GOST 15CH12WNMF Forged Rods, GOST 15CH12WNMF Black Round Bars, Bright Round Bars, GOST 15CH12WNMF Rolled Round Bars, GOST 15CH12WNMF Peeled Round Bars, GOST 15CH12WNMF Proof Machined Round Bars, GOST 15CH12WNMF Threaded Round Bars, GOST 15CH12WNMF Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelGOST 15CH12WNMF Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelGOST 15CH12WNMF Round Bars, GOST 15CH12WNMF Round Forged Bars, GOST 15CH12WNMF Forged Rods, GOST 15CH12WNMF Black Round Bars, Bright Round Bars, GOST 15CH12WNMF Rolled Round Bars, GOST 15CH12WNMF Peeled Round Bars, GOST 15CH12WNMF Proof Machined Round Bars, GOST 15CH12WNMF Threaded Round Bars, GOST 15CH12WNMF Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.
Yes! I am interested

GTC-1903 Stainless Steel Round Bar, SIEMENS PDS-10705BU Rods, GTC-1903, SIEMENS PDS-10705BU Bars

REQUEST CALLBACK

GTC-1903 Stainless Steel Round Bar, SIEMENS PDS-10705BU Rods, GTC-1903, SIEMENS PDS-10705BU Bars
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 798 / KgGet Latest Price

Product Details:
Material GradeGTC-1903, SIEMENS PDS-10705BU
Size10 to 400mm
ShapeRound
Single Piece Length3 meter
Usage/ApplicationManufacturing
Test CertificateNabl
BrandJIPL
Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch
Properties 2SIEMENS PDS-10705BU Chemical Property, SIEMENS PDS-10705BU Chemical Composition
Properties 3SIEMENS PDS-10705BU Chemistry, SIEMENS PDS-10705BU Properties
Properties 1GTC-1903 Chemical Property, GTC-1903 Chemical Composition, GTC-1903 Chemistry, GTC-1903 Properties

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelGTC-1903, SIEMENS PDS-10705BU Round Bars, GTC-1903, SIEMENS PDS-10705BU Round Forged Bars, GTC-1903, SIEMENS PDS-10705BU Forged Rods, GTC-1903, SIEMENS PDS-10705BU Black Round Bars, Bright Round Bars, GTC-1903, SIEMENS PDS-10705BU Rolled Round Bars, GTC-1903, SIEMENS PDS-10705BU Peeled Round Bars, GTC-1903, SIEMENS PDS-10705BU Proof Machined Round Bars, GTC-1903, SIEMENS PDS-10705BU Threaded Round Bars, GTC-1903, SIEMENS PDS-10705BU Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for GTC-1903, SIEMENS PDS-10705BU Round Bars: 6mm upto 1200mm

Length for GTC-1903, SIEMENS PDS-10705BU Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of GTC-1903, SIEMENS PDS-10705BU Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for GTC-1903, SIEMENS PDS-10705BU Round Bars: Bright & Black

GTC-1903, SIEMENS PDS-10705BU Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel GTC-1903, SIEMENS PDS-10705BU Round Bars, GTC-1903, SIEMENS PDS-10705BU Round Forged Bars, GTC-1903, SIEMENS PDS-10705BU Forged Rods, GTC-1903, SIEMENS PDS-10705BU Black Round Bars, Bright Round Bars, GTC-1903, SIEMENS PDS-10705BU Rolled Round Bars, GTC-1903, SIEMENS PDS-10705BU Peeled Round Bars, GTC-1903, SIEMENS PDS-10705BU Proof Machined Round Bars, GTC-1903, SIEMENS PDS-10705BU Threaded Round Bars, GTC-1903, SIEMENS PDS-10705BU Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelGTC-1903, SIEMENS PDS-10705BU Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelGTC-1903, SIEMENS PDS-10705BU Round Bars, GTC-1903, SIEMENS PDS-10705BU Round Forged Bars, GTC-1903, SIEMENS PDS-10705BU Forged Rods, GTC-1903, SIEMENS PDS-10705BU Black Round Bars, Bright Round Bars, GTC-1903, SIEMENS PDS-10705BU Rolled Round Bars, GTC-1903, SIEMENS PDS-10705BU Peeled Round Bars, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.
Yes! I am interested

GB/T 22CR12NIWMOV Stainless Steel Round Bar, UNS S47220 Rods, GB/T 22CR12NIWMOV Bars, Blank, Rings

REQUEST CALLBACK

GB/T 22CR12NIWMOV Stainless Steel Round Bar, UNS S47220 Rods, GB/T 22CR12NIWMOV Bars, Blank, Rings
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 898 / KgGet Latest Price

Product Details:
Material GradeGB/T 22CR12NIWMOV, UNS S47220
Size10 to 400mm
Single Piece Length3 meter
Usage/ApplicationManufacturing
ShapeRound
BrandJIPL
Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch
Properties 1GB/T 22CR12NIWMOV Chemical Property, GB/T 22CR12NIWMOV Chemical Composition
Properties 2GB/T 22CR12NIWMOV Chemistry, GB/T 22CR12NIWMOV Properties
Properties 3UNS S47220 Chemical Property, UNS S47220 Chemical Composition, UNS S47220 Chemistry, Properties
Country of OriginMade in India

GB/T 22CR12NIWMOV Stainless Steel Round Bar, UNS S47220 Rods, GB/T 22CR12NIWMOV Bars, Blank, Rings

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelGB/T 22CR12NIWMOV / S47220 Round Bars, GB/T 22CR12NIWMOV / S47220 Round Forged Bars, GB/T 22CR12NIWMOV / S47220 Forged Rods, GB/T 22CR12NIWMOV / S47220 Black Round Bars, Bright Round Bars, GB/T 22CR12NIWMOV / S47220 Rolled Round Bars, GB/T 22CR12NIWMOV / S47220 Peeled Round Bars, GB/T 22CR12NIWMOV / S47220 Proof Machined Round Bars, GB/T 22CR12NIWMOV / S47220 Threaded Round Bars, GB/T 22CR12NIWMOV / S47220 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for GB/T 22CR12NIWMOV / S47220 Round Bars: 6mm upto 1200mm

Length for GB/T 22CR12NIWMOV / S47220 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of GB/T 22CR12NIWMOV / S47220 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for GB/T 22CR12NIWMOV / S47220 Round Bars: Bright & Black

GB/T 22CR12NIWMOV / S47220 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel GB/T 22CR12NIWMOV / S47220 Round Bars, GB/T 22CR12NIWMOV / S47220 Round Forged Bars, GB/T 22CR12NIWMOV / S47220 Forged Rods, GB/T 22CR12NIWMOV / S47220 Black Round Bars, Bright Round Bars, GB/T 22CR12NIWMOV / S47220 Rolled Round Bars, GB/T 22CR12NIWMOV / S47220 Peeled Round Bars, GB/T 22CR12NIWMOV / S47220 Proof Machined Round Bars, GB/T 22CR12NIWMOV / S47220 Threaded Round Bars, GB/T 22CR12NIWMOV / S47220 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelGB/T 22CR12NIWMOV / S47220 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelGB/T 22CR12NIWMOV / S47220 Round Bars, GB/T 22CR12NIWMOV / S47220 Round Forged Bars, GB/T 22CR12NIWMOV / S47220 Forged Rods, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.
Yes! I am interested

GB/T 2CR12NIMO1W1V Stainless Steel Round Bar, GB/T 2CR12NIMO1W1V Rods, GB/T 2CR12NIMO1W1V Bars

REQUEST CALLBACK

GB/T 2CR12NIMO1W1V Stainless Steel Round Bar, GB/T 2CR12NIMO1W1V Rods, GB/T 2CR12NIMO1W1V Bars
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 995 / PieceGet Latest Price

Product Details:
Material GradeGB/T 2CR12NIMO1W1V
Size10 to 400mm
Single Piece Length3 meter
ShapeRound
Usage/ApplicationManufacturing
BrandJIPL
Thickness/Diameter0-1 inch, 2-3 inch, 1-2 inch
Properties 1GB/T 2CR12NIMO1W1V Chemical Property, GB/T 2CR12NIMO1W1V Chemical Composition
Properties 2GB/T 2CR12NIMO1W1V Chemistry, GB/T 2CR12NIMO1W1V Properties
Country of OriginMade in India

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelGB/T 2CR12NIMO1W1V Round Bars, GB/T 2CR12NIMO1W1V Round Forged Bars, GB/T 2CR12NIMO1W1V Forged Rods, GB/T 2CR12NIMO1W1V Black Round Bars, Bright Round Bars, GB/T 2CR12NIMO1W1V Rolled Round Bars, GB/T 2CR12NIMO1W1V Peeled Round Bars, GB/T 2CR12NIMO1W1V Proof Machined Round Bars, GB/T 2CR12NIMO1W1V Threaded Round Bars, GB/T 2CR12NIMO1W1V Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for GB/T 2CR12NIMO1W1V Round Bars: 6mm upto 1200mm

Length for GB/T 2CR12NIMO1W1V Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of GB/T 2CR12NIMO1W1V Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for GB/T 2CR12NIMO1W1V Round Bars: Bright & Black

GB/T 2CR12NIMO1W1V Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel GB/T 2CR12NIMO1W1V Round Bars, GB/T 2CR12NIMO1W1V Round Forged Bars, GB/T 2CR12NIMO1W1V Forged Rods, GB/T 2CR12NIMO1W1V Black Round Bars, Bright Round Bars, GB/T 2CR12NIMO1W1V Rolled Round Bars, GB/T 2CR12NIMO1W1V Peeled Round Bars, GB/T 2CR12NIMO1W1V Proof Machined Round Bars, GB/T 2CR12NIMO1W1V Threaded Round Bars, GB/T 2CR12NIMO1W1V Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelGB/T 2CR12NIMO1W1V Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelGB/T 2CR12NIMO1W1V Round Bars, GB/T 2CR12NIMO1W1V Round Forged Bars, GB/T 2CR12NIMO1W1V Forged Rods, GB/T 2CR12NIMO1W1V Black Round Bars, Bright Round Bars, GB/T 2CR12NIMO1W1V Rolled Round Bars, GB/T 2CR12NIMO1W1V Peeled Round Bars, GB/T 2CR12NIMO1W1V Proof Machined Round Bars, GB/T 2CR12NIMO1W1V Threaded Round Bars, GB/T 2CR12NIMO1W1V Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.
Yes! I am interested

AISI 616 Stainless Steel Round Bar, MIL S 861 Rods, MIL S 861 Bars, AISI 616 Blank Circle Rings

REQUEST CALLBACK

AISI 616 Stainless Steel Round Bar, MIL S 861 Rods, MIL S 861 Bars, AISI 616 Blank Circle Rings
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 895 / KgGet Latest Price

Product Details:
Material GradeAISI 616, MIL S 861
Size10 to 400mm
ShapeRound
Usage/ApplicationManufacturing
Single Piece Length3 meter
BrandJIPL
Test CertificateNabl
Thickness/Diameter2-3 inch, 0-1 inch, 1-2 inch
Properties 2AISI 616 Chemical Property, AISI 616 Chemical Composition, AISI 616 Chemistry, AISI 616 Properties
Properties 1MIL S 861 Chemical Property,MIL S 861 Chemical Composition,MIL S 861 Chemistry,MIL S 861 Properties

AISI 616 Stainless Steel Round Bar, MIL S 861 Rods, MIL S 861 Bars, AISI 616 Blank Circle Rings

 

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelAISI 616 / MIL S 861 Round Bars, AISI 616 / MIL S 861 Round Forged Bars, AISI 616 / MIL S 861 Forged Rods, AISI 616 / MIL S 861 Black Round Bars, Bright Round Bars, AISI 616 / MIL S 861 Rolled Round Bars, AISI 616 / MIL S 861 Peeled Round Bars, AISI 616 / MIL S 861 Proof Machined Round Bars, AISI 616 / MIL S 861 Threaded Round Bars, AISI 616 / MIL S 861 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for AISI 616 / MIL S 861 Round Bars: 6mm upto 1200mm

Length for AISI 616 / MIL S 861 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of AISI 616 / MIL S 861 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for AISI 616 / MIL S 861 Round Bars: Bright & Black

AISI 616 / MIL S 861 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel AISI 616 / MIL S 861 Round Bars, AISI 616 / MIL S 861 Round Forged Bars, AISI 616 / MIL S 861 Forged Rods, AISI 616 / MIL S 861 Black Round Bars, Bright Round Bars, AISI 616 / MIL S 861 Rolled Round Bars, AISI 616 / MIL S 861 Peeled Round Bars, AISI 616 / MIL S 861 Proof Machined Round Bars, AISI 616 / MIL S 861 Threaded Round Bars, AISI 616 / MIL S 861 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelAISI 616 / MIL S 861 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelAISI 616 / MIL S 861 Round Bars, AISI 616 / MIL S 861 Round Forged Bars, AISI 616 / MIL S 861 Forged Rods, AISI 616 / MIL S 861 Black Round Bars, Bright Round Bars, Rolled Round Bars, AISI 616 / MIL S 861 Peeled Round Bars, AISI 616 / MIL S 861 Proof Machined Round Bars, AISI 616 / MIL S 861 Threaded Round Bars, AISI 616 / MIL S 861 Normalized Round Bars, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.
Yes! I am interested

EN 61 Stainless Steel Round Bar, EN61 Rods, DOD F 24669/7 Bars, DOD F 24669/7 Blank Circle Rings

REQUEST CALLBACK

EN 61 Stainless Steel Round Bar, EN61 Rods, DOD F 24669/7 Bars, DOD F 24669/7 Blank Circle Rings
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1,125 / KgGet Latest Price

Product Details:
Material GradeEN 61, DOD F 24669/7 Bars
Single Piece Length3 meter
Size10 to 400mm
ShapeRound
Usage/ApplicationManufacturing
BrandJIPL
Thickness/Diameter1-2 inch, 0-1 inch, 2-3 inch
Properties 2DOD F 24669/7 Chemical Property, DOD F 24669/7 Chemical Composition, DOD F 24669/7 Chemistry
Properties 1EN 61 Chemical Property, EN 61 Chemical Composition, EN 61 Chemistry, EN 61 Properties
Country of OriginMade in India

EN 61 Stainless Steel Round Bar, EN61 Rods, DOD F 24669/7 Bars, DOD F 24669/7 Blank Circle Rings

Tradewell Ferromet can offer VACUUM DEGASSING (VD) route Stainless SteelEN 61 / DOD F 24669/7 Round Bars, EN 61 / DOD F 24669/7 Round Forged Bars, EN 61 / DOD F 24669/7 Forged Rods, EN 61 / DOD F 24669/7 Black Round Bars, Bright Round Bars, EN 61 / DOD F 24669/7 Rolled Round Bars, EN 61 / DOD F 24669/7 Peeled Round Bars, EN 61 / DOD F 24669/7 Proof Machined Round Bars, EN 61 / DOD F 24669/7 Threaded Round Bars, EN 61 / DOD F 24669/7 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for EN 61 / DOD F 24669/7 Round Bars: 6mm upto 1200mm

Length for EN 61 / DOD F 24669/7 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of EN 61 / DOD F 24669/7 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for EN 61 / DOD F 24669/7 Round Bars: Bright & Black

EN 61 / DOD F 24669/7 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) route Stainless Steel EN 61 / DOD F 24669/7 Round Bars, EN 61 / DOD F 24669/7 Round Forged Bars, EN 61 / DOD F 24669/7 Forged Rods, EN 61 / DOD F 24669/7 Black Round Bars, Bright Round Bars, EN 61 / DOD F 24669/7 Rolled Round Bars, EN 61 / DOD F 24669/7 Peeled Round Bars, EN 61 / DOD F 24669/7 Proof Machined Round Bars, EN 61 / DOD F 24669/7 Threaded Round Bars, EN 61 / DOD F 24669/7 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Hex-agonal Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Stainless SteelEN 61 / DOD F 24669/7 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Stainless SteelEN 61 / DOD F 24669/7 Round Bars, EN 61 / DOD F 24669/7 Round Forged Bars, EN 61 / DOD F 24669/7 Forged Rods, EN 61 / DOD F 24669/7 Black Round Bars, Bright Round Bars, EN 61 / DOD F 24669/7 Rolled Round Bars, EN 61 / DOD F 24669/7 Peeled Round Bars, EN 61 / DOD F 24669/7 Proof Machined Round Bars, EN 61 / DOD F 24669/7 Threaded Round Bars, EN 61 / DOD F 24669/7 Normalized Round Bars, Hex-agonal Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Yes! I am interested

 
X


Explore More Products

Contact via E-mail
Contact via SMS
Ajit M. Mehta (Director)
Jayant Impex Private Limited
Shop No. 4, Deccan Bank Bldg, 215/217, R.R.Mohan Roy Road,Grant Road
Mumbai - 400004, Maharashtra, India
Call Us: 
Call Response Rate: 83%
Share Us :



Home  |   About Us   |  Our Products  |  Site Map  |   Contact Us

© Jayant Impex Private Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Jayant Impex Private Limited