Low Alloy Steel

Approx. Rs 129 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0910 / HX160YD Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0910 / HX160YD:

Other possible products of 1.0910 / HX160YD:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0910 / HX160YD Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0910 / HX160YD Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0910 / HX160YD Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0910 / HX160YD Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0910 / HX160YD Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0910 / HX160YD Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

If any requirements for 1.0910 / HX160YD Bars & Rods - Flat, Square, Ring, Hollow, Hex kindly do contact us.

Additional Information:

• Item Code: 1-0910-hx160yd-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 132 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0919 / HX220BD Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0919 / HX220BD:

Other possible products of 1.0919 / HX220BD:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0919 / HX220BD Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0919 / HX220BD Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0919 / HX220BD Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0919 / HX220BD Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0919 / HX220BD Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0919 / HX220BD Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0919-hx220bd-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 188 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0921 / HX180YD Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0921 / HX180YD:

Other possible products of 1.0921 / HX180YD:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0921 / HX180YD Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0921 / HX180YD Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0921 / HX180YD Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0921 / HX180YD Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0921 / HX180YD Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0921 / HX180YD Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0921-hx180yd-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 181 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0923 / HX220YD Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0923 / HX220YD:

Other possible products of 1.0923 / HX220YD:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0923 / HX220YD Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0923 / HX220YD Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0923 / HX220YD Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0923 / HX220YD Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0923 / HX220YD Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0923 / HX220YD Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

If any requirements for 1.0923 / HX220YD Bars & Rods - Flat, Square, Ring, Hollow, Hex kindly do contact us.

Additional Information:

• Item Code: 1-0923-hx220yd-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 184 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0925 / HC220Y Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0925 / HC220Y:

Other possible products of 1.0925 / HC220Y:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0925 / HC220Y Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0925 / HC220Y Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0925 / HC220Y Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0925 / HC220Y Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0925 / HC220Y Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0925 / HC220Y Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0925-hc220y-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 154 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0927 / HX300YD Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0927 / HX300YD:

Other possible products of 1.0927 / HX300YD:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0927 / HX300YD Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0927 / HX300YD Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0927 / HX300YD Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0927 / HX300YD Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0927 / HX300YD Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0927 / HX300YD Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

If any requirements for 1.0927 / HX300YD Bars & Rods - Flat, Square, Ring, Hollow, Hex kindly do contact us.

Additional Information:

• Item Code: 1-0927-hx300yd-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 187 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0929 / HX260LAD Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0929 / HX260LAD:

Other possible products of 1.0929 / HX260LAD:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0929 / HX260LAD Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0929 / HX260LAD Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0929 / HX260LAD Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0929 / HX260LAD Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0929 / HX260LAD Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0929 / HX260LAD Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

If any requirements for 1.0929 / HX260LAD Bars & Rods - Flat, Square, Ring, Hollow, Hex kindly do contact us.

Additional Information:

• Item Code: 1-0929-hx260lad-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 142 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0932 / HX300LAD Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0932 / HX300LAD:

Other possible products of 1.0932 / HX300LAD:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0932 / HX300LAD Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0932 / HX300LAD Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0932 / HX300LAD Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0932 / HX300LAD Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0932 / HX300LAD Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0932 / HX300LAD Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

If any requirements for 1.0932 / HX300LAD Bars & Rods - Flat, Square, Ring, Hollow, Hex kindly do contact us.

Additional Information:

• Item Code: 1-0932-hx300lad-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 172 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0934 / HX380LAD Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0934 / HX380LAD:

Other possible products of 1.0934 / HX380LAD:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0934 / HX380LAD Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0934 / HX380LAD Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0934 / HX380LAD Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0934 / HX380LAD Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0934 / HX380LAD Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0934 / HX380LAD Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

If any requirements for 1.0934 / HX380LAD Bars & Rods - Flat, Square, Ring, Hollow, Hex kindly do contact us.

Additional Information:

• Item Code: 1-0934-hx380lad-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 130 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0914 / HX180BD Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0914 / HX180BD:

Other possible products of 1.0914 / HX180BD:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0914 / HX180BD Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0914 / HX180BD Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0914 / HX180BD Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0914 / HX180BD Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0914 / HX180BD Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0914 / HX180BD Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

If any requirements for 1.0914 / HX180BD Bars & Rods - Flat, Square, Ring, Hollow, Hex kindly do contact us.

Additional Information:

• Item Code: 1-0914-hx180bd-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 195 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0920 / E355K2 Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0920 / E355K2:

Other possible products of 1.0920 / E355K2:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0920 / E355K2 Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0920 / E355K2 Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0920 / E355K2 Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0920 / E355K2 Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0920 / E355K2 Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0920 / E355K2 Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

If any requirements for 1.0920 / E355K2 Bars & Rods - Flat, Square, Ring, Hollow, Hex kindly do contact us.

Additional Information:

• Item Code: 1-0920-e355k2-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 195 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0922 / HC180Y Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0922 / HC180Y:

Other possible products of 1.0922 / HC180Y:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0922 / HC180Y Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0922 / HC180Y Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0922 / HC180Y Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0922 / HC180Y Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0922 / HC180Y Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0922 / HC180Y Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0922-hc180y-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 182 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0924 / HX260BD Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0924 / HX260BD:

Other possible products of 1.0924 / HX260BD:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0924 / HX260BD Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0924 / HX260BD Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0924 / HX260BD Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0924 / HX260BD Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0924 / HX260BD Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0924 / HX260BD Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0924-hx260bd-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 186 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0926 / HX260YD Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0926 / HX260YD:

Other possible products of 1.0926 / HX260YD:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0926 / HX260YD Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0926 / HX260YD Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0926 / HX260YD Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0926 / HX260YD Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0926 / HX260YD Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0926 / HX260YD Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0926-hx260yd-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 159 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0928 / HC260Y Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0928 / HC260Y:

Other possible products of 1.0928 / HC260Y:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0928 / HC260Y Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0928 / HC260Y Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0928 / HC260Y Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0928 / HC260Y Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0928 / HC260Y Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0928 / HC260Y Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0928-hc260y-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 158 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0930 / HX300BD Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0930 / HX300BD:

Other possible products of 1.0930 / HX300BD:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0930 / HX300BD Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0930 / HX300BD Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0930 / HX300BD Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0930 / HX300BD Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0930 / HX300BD Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0930 / HX300BD Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0930-hx300bd-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 145 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0933 / HX340LAD Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0933 / HX340LAD:

Other possible products of 1.0933 / HX340LAD:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0933 / HX340LAD Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0933 / HX340LAD Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0933 / HX340LAD Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0933 / HX340LAD Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0933 / HX340LAD Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0933 / HX340LAD Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0933-hx340lad-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 172 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0935 / HX420LAD Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0935 / HX420LAD:

Other possible products of 1.0935 / HX420LAD:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0935 / HX420LAD Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0935 / HX420LAD Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0935 / HX420LAD Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0935 / HX420LAD Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0935 / HX420LAD Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0935 / HX420LAD Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

If any requirements for 1.0935 / HX420LAD Bars & Rods - Flat, Square, Ring, Hollow, Hex kindly do contact us.

Additional Information:

• Item Code: 1-0935-hx420lad-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 159 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0936 / HDT580X Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0936 / HDT580X:

Other possible products of 1.0936 / HDT580X:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0936 / HDT580X Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0936 / HDT580X Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0936 / HDT580X Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0936 / HDT580X Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0936 / HDT580X Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0936 / HDT580X Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0936-hdt580x-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 137 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0943 / HCT780X Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0943 / HCT780X:

Other possible products of 1.0943 / HCT780X:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0943 / HCT780X Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0943 / HCT780X Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0943 / HCT780X Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0943 / HCT780X Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0943 / HCT780X Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0943 / HCT780X Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

If any requirements for 1.0943 / HCT780X Bars & Rods - Flat, Square, Ring, Hollow, Hex kindly do contact us.

Additional Information:

• Item Code: 1-0943-hct780x-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 126 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0939 / HCT500X Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0939 / HCT500X:

Other possible products of 1.0939 / HCT500X:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0939 / HCT500X Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0939 / HCT500X Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0939 / HCT500X Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0939 / HCT500X Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0939 / HCT500X Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0939 / HCT500X Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

If any requirements for 1.0939 / HCT500X Bars & Rods - Flat, Square, Ring, Hollow, Hex kindly do contact us.

Additional Information:

• Item Code: 1-0939-hct500x-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 188 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0945 / HX340BD Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0945 / HX340BD:

Other possible products of 1.0945 / HX340BD:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0945 / HX340BD Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0945 / HX340BD Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0945 / HX340BD Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0945 / HX340BD Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0945 / HX340BD Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0945 / HX340BD Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0945-hx340bd-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 139 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0937 / HCT450X Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0937 / HCT450X:

Other possible products of 1.0937 / HCT450X:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0937 / HCT450X Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0937 / HCT450X Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0937 / HCT450X Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0937 / HCT450X Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0937 / HCT450X Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0937 / HCT450X Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Approx. Rs 138 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0941 / HCT600X Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0941 / HCT600X:

Other possible products of 1.0941 / HCT600X:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0941 / HCT600X Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0941 / HCT600X Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0941 / HCT600X Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0941 / HCT600X Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0941 / HCT600X Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0941 / HCT600X Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0941-hct600x-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 155 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0944 / HCT980X Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0944 / HCT980X:

Other possible products of 1.0944 / HCT980X:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0944 / HCT980X Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0944 / HCT980X Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0944 / HCT980X Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0944 / HCT980X Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0944 / HCT980X Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0944 / HCT980X Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

If any requirements for 1.0944 / HCT980X Bars & Rods - Flat, Square, Ring, Hollow, Hex kindly do contact us.

Additional Information:

• Item Code: 1-0944-hct980x-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 127 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0947 / HCT690T Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0947 / HCT690T:

Other possible products of 1.0947 / HCT690T:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0947 / HCT690T Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0947 / HCT690T Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0947 / HCT690T Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0947 / HCT690T Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0947 / HCT690T Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0947 / HCT690T Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0947-hct690t-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 148 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0948 / HCT780T Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0948 / HCT780T:

Other possible products of 1.0948 / HCT780T:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0948 / HCT780T Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0948 / HCT780T Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0948 / HCT780T Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0948 / HCT780T Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0948 / HCT780T Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0948 / HCT780T Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0948-hct780t-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 166 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0954 / HCT780C Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0954 / HCT780C:

Other possible products of 1.0954 / HCT780C:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0954 / HCT780C Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0954 / HCT780C Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0954 / HCT780C Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0954 / HCT780C Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0954 / HCT780C Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0954 / HCT780C Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0954-hct780c-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 173 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0956 / HDT750C Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0956 / HDT750C:

Other possible products of 1.0956 / HDT750C:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0956 / HDT750C Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0956 / HDT750C Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0956 / HDT750C Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0956 / HDT750C Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0956 / HDT750C Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0956 / HDT750C Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Approx. Rs 178 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0958 / HDT950C Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0958 / HDT950C:

Other possible products of 1.0958 / HDT950C:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0958 / HDT950C Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0958 / HDT950C Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0958 / HDT950C Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0958 / HDT950C Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0958 / HDT950C Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0958 / HDT950C Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0958-hdt950c-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 183 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0961 / HDT450F Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0961 / HDT450F:

Other possible products of 1.0961 / HDT450F:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0961 / HDT450F Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0961 / HDT450F Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0961 / HDT450F Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0961 / HDT450F Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0961 / HDT450F Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0961 / HDT450F Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0961-hdt450f-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 167 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0971 / S260NC Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0971 / S260NC:

Other possible products of 1.0971 / S260NC:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0971 / S260NC Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0971 / S260NC Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0971 / S260NC Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0971 / S260NC Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0971 / S260NC Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0971 / S260NC Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0971-s260nc-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 197 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0973 / S315NC Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0973 / S315NC:

Other possible products of 1.0973 / S315NC:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0973 / S315NC Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0973 / S315NC Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0973 / S315NC Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0973 / S315NC Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0973 / S315NC Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0973 / S315NC Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

If any requirements for 1.0973 / S315NC Bars & Rods - Flat, Square, Ring, Hollow, Hex kindly do contact us.

Additional Information:

• Item Code: 1-0973-s315nc-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 153 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0977 / S355NC Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0977 / S355NC:

Other possible products of 1.0977 / S355NC:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0977 / S355NC Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0977 / S355NC Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0977 / S355NC Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0977 / S355NC Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0977 / S355NC Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0977 / S355NC Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

If any requirements for 1.0977 / S355NC Bars & Rods - Flat, Square, Ring, Hollow, Hex kindly do contact us.

Additional Information:

• Item Code: 1-0977-s355nc-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 159 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0981 / S420NC Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0981 / S420NC:

Other possible products of 1.0981 / S420NC:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0981 / S420NC Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0981 / S420NC Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0981 / S420NC Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0981 / S420NC Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0981 / S420NC Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0981 / S420NC Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0981-s420nc-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 134 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0984 / S500MC Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0984 / S500MC:

Other possible products of 1.0984 / S500MC:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0984 / S500MC Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0984 / S500MC Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0984 / S500MC Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0984 / S500MC Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0984 / S500MC Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0984 / S500MC Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0984-s500mc-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 193 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0990 / HX460LAD Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0990 / HX460LAD:

Other possible products of 1.0990 / HX460LAD:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0990 / HX460LAD Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0990 / HX460LAD Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0990 / HX460LAD Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0990 / HX460LAD Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0990 / HX460LAD Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0990 / HX460LAD Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

If any requirements for 1.0990 / HX460LAD Bars & Rods - Flat, Square, Ring, Hollow, Hex kindly do contact us.

Additional Information:

• Item Code: 1-0990-hx460lad-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 167 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0953 / HCT600C Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0953 / HCT600C:

Other possible products of 1.0953 / HCT600C:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0953 / HCT600C Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0953 / HCT600C Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0953 / HCT600C Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0953 / HCT600C Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0953 / HCT600C Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0953 / HCT600C Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

Additional Information:

• Item Code: 1-0953-hct600c-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 168 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0955 / HCT980C Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0955 / HCT980C:

Other possible products of 1.0955 / HCT980C:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0955 / HCT980C Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0955 / HCT980C Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0955 / HCT980C Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0955 / HCT980C Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0955 / HCT980C Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0955 / HCT980C Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

If any requirements for 1.0955 / HCT980C Bars & Rods - Flat, Square, Ring, Hollow, Hex kindly do contact us.

Additional Information:

• Item Code: 1-0955-hct980c-round-flat-square-bar-rods-bars-hollow-rings

Approx. Rs 198 / KgGet Latest Price

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 1.0991 / HX500LAD Bars & Rods - Flat, Square, Ring, Hollow, Hex , alloy steel bars, carbon steel, alloy steel supplier, exporter, trader, wholesaler, stockiest, retailer, dealer, distributor, stock holder.

Chemical composition % of non alloy steel 1.0991 / HX500LAD:

Other possible products of 1.0991 / HX500LAD:

Billet(Concast, Round, Square), Bar, Round Bar, Flat Bar, Square Bar, Round Corner Square Bar, RCS Bar, Straight Corner Square Bar, SCS Bar, Hexagonal Bar, Hollow Bar, Hex Bar, Concast Bar, Forged Bar, Rolled Bar, Black Bar, Bright Bar, Peeled Bar, Machined Bar (Proof Machined), Annealed Bar (Spheroidized Annealed), Hardened & Tempered (HT) Bar, Quenched & Tempered (QT) Bar, Blocks (Square, Rectangular), Slabs, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Ring (Seamless, Welded, Forged, Rolled), Forged Ring, Rolled Ring, Seamless Ring, Welded Ring, Tube, Tubing, Pipe, Flange, Fitting, Fasteners, Stud, Bolt, Screws, Nut, Washer, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Rods, Shims (Shim-Sheets), Wires, Springs, Bearings, Structural Steel, Angle, Channel, I beam, H Beam

Size Specifications for 1.0991 / HX500LAD Low Alloy Steel Billets: 125 x 125, 160 x 160, 200 x 200mm

Diameter for 1.0991 / HX500LAD Low Alloy Steel Round Bar & Rods: 22mm upto 400mm

Dimensions Specifications for 1.0991 / HX500LAD Low Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length(can be Customized)

OD for 1.0991 / HX500LAD Low Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Range for 1.0991 / HX500LAD Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of 1.0991 / HX500LAD Bars & Rods - Flat, Square, Ring, Hollow, Hex online ready stock at premium price from us to any destination by just sending us an email.

If any requirements for 1.0991 / HX500LAD Bars & Rods - Flat, Square, Ring, Hollow, Hex kindly do contact us.

Additional Information:

• Item Code: 1-0991-hx500lad-round-flat-square-bar-rods-bars-hollow-rings