Send Email
Send SMS
Search
Jayant Impex Private Limited
Jayant Impex Private Limited


Steel Bars, Rods, Plates & Sheets

Prominent & Leading Exporter from Mumbai, we offer 304 stainless steel plates, 304 stainless steel round bar, 309 stainless steel round bar, 310 stainless steel round bar, 316 stainless steel plate and 316 stainless steel sheet.

304 Stainless Steel Plates

REQUEST CALLBACK

304 Stainless Steel Plates
Approx. INR 200 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity500 Kilogram
Surface FinishNo.1, No.3, No.4, No.8, 2B, BA, 2E, Scotch Brite, Embossing, Anti-fingerprint, Etching
Width1000 mm, 1250 mm, 1270 mm and 1600 mm. Any other customized Width in ranges from 21 mm to 1600 mm
Chemical Composition(Chemistry) of 304 Stainless Steel PlatesC: 0.08 max, Cr: 18 - 20, Fe: 66.34-74, Mn: 2 max, Ni: 8-10.5, P: 0.045 max, S: 0.03 max, Si:1 max
Length2000 mm, 2500 mm, 5000 mm and 6000 mm. Any other customized Length in ranges from 400 mm to 6000 mm
Third Party InspectionCan be done at an extra cost
Payment TermsStrictly against proforma invoice. Sorry no credits.
Payment ModePay TM, Cheque, RTGS, NEFT, T/T, Reputed Bank Irrevocable Confirmed Bank L/C.
Size (feet X feet)4 x 8
Thickness>5 mm
BrandJindal, Imported (No MTC for imported material will be given). NABL laboratory reports possible.
Material GradeOutokumpu 4301, EN 1.4301, ASTM 304, UNS S30400, JIS SUS 304, ISO 4301-304-00-I, BS 304S31
Surface TreatmentAnealed, Pickled , Hot Rolled

Jayant Impex Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer 304 Stainless Steel Plate.

304 (UNS S30400) are austenitic alloys of stainless steel plates. These alloys are the most familiar and most frequently used alloys in the stainless steel family.

304 Stainless Steel Plates can be avail as hot rolled in annealed & pickled condition.

Size Specifications: Can offer 304 Stainless Steel Plate in size range as mentioned below:

Thickness: 5mm upto 80mm

Width: 1000 mm, 1250 mm, 1270 mm and 1600 mm. Any other customized Width in ranges from 21 mm to 1600 mm

Length: 2000 mm, 2500 mm, 5000 mm and 6000 mm. Any other customized Length in ranges from 400 mm to 6000 mm

Surface Finishes for 304 Stainless Steel Plates are as follows:

  • No. 1: Hot rolled annealed, shot blasted and pickled
  • 2B: Cold rolled annealed and pickled and skin passed
  • BA: Bright annealed finish; processed with bright heat treatment after cold rolling
  • No. 3: Cold rolled annealed and pickled and polished with 100 to 120 grit
  • No. 4: Cold rolled annealed and pickled and polished with 150 to 180 grit

Scotch Brite: Very fine hairline finish generated by polishing with rolls made out of scotch brite material

Embossing: Cold rolled annealed and pickled; given an appropriate embossed luster by embossing process

Anti-fingerprint: Cold rolled annealed and pickled and coated with Acrylic Solution

No. 8 / Mirror: Cold rolled annealed and pickled and polished to mirror finish

Etching: Cold rolled annealed and pickled and pattern surface

2E: Cold rolled, heat treated, mechanically descaled and pickled

Different Designations of304 Stainless Steel Plate:

Outokumpu 4301, EN 1.4301, ASTM 304, UNS S30400, JIS SUS 304, ISO 4301-304-00-I, BS 304S31, DIN 1.4301, NF Z7 CN 18-09, SS 2333, GB 0Cr18Ni9, KS STS 304, GOST 08X18H10, B.S. 302 S 17, B.S. 304 S 15, B.S. 304 S 16, B.S. 304 S 18, B.S. 304 S 25, B.S. 304 S 40, B.S. En.58 E, AMS 5501, AMS 5513, AMS 5560, AMS 5565, AMS 5566, AMS 5567, AMS 5639, AMS 5697, ASME SA182, ASME SA194 (Type 8), ASME SA213, ASME SA240, ASME SA249, ASME SA312, ASME SA320 (B8), ASME SA358, ASME SA376, ASME SA403, ASME SA409, ASME SA430, ASME SA479, ASME SA688, ASTM A167, ASTM A182, ASTM A193, ASTM A194, ASTM A213, ASTM A240, ASTM A249, ASTM A269, ASTM A270, ASTM A271, ASTM A276, ASTM A312, ASTM A313, ASTM A314, ASTM A320, ASTM A368, ASTM A376, ASTM A409, ASTM A430, ASTM A473, ASTM A478, ASTM A479, ASTM A492, ASTM A493, ASTM A511, ASTM A554, ASTM A580, ASTM A632, ASTM A651, ASTM A666, ASTM A688, FED QQ-S-763, FED QQ-S-766, FED QQ-W-423, FED STD-66, MIL SPEC M.IL-S-5059, MIL SPEC MIL-F-20138, MIL SPEC MIL-S-23195, MIL SPEC MIL-S-23196, MIL SPEC MIL-S-862, MIL SPEC MIL-S-862, MIL SPEC MIL-T-6845, MIL SPEC MIL-T-8504, MIL SPEC MIL-T-8506, SAE 30304, SAE J405 (30304), UNI X 5 CrNi 18 10

We stock, supply, export, wholesale 304 Stainless Steel Plate which are used in applications as mentioned below:

  • Food processing and handling
  • Heat exchangers
  • Chemical process vessels
  • Conveyors
  • Architectural

We can supply smaller quantities of 304 Stainless Steel Plate from our associated manufacturing unit in India.

If any requirements for 304 Stainless Steel Plate kindlydo contact us.



Additional Information:

  • Item Code: 304-stainless-steel-plate-ss-304-plates-304-stainless-plates
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Nhavasheva, Khopoli, Mumbai, India
  • Delivery Time: Immediate if ready stock
Yes! I am interested

304 Stainless Steel Round Bar

REQUEST CALLBACK

304 Stainless Steel Round Bar
Approx. INR 195 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity500 Kilogram
304 Stainless Steel Round Bars FinishRolled, Forged, Annealed, Black, Bright, Peeled, Proof Machined
Chemical Composition(Chemistry) of 304 Stainless SteelC: 0.08 max, Cr: 18 - 20, Fe: 66.345 - 74, Mn: 2 max, Ni: 8 - 10.5, P: 0.045 max, S: 0.03 max, Si: 1
Third Party InspectionCan be done at an extra cost
Payment TermsStrictly against proforma invoice. Sorry no credits.
Payment ModePay TM, Cheque, RTGS, NEFT, T/T, Reputed Bank Irrevocable Confirmed Bank L/C.
Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch
BrandIndian, Imported (No MTC for imported material will be given). NABL laboratory reports possible.
Material GradeOutokumpu 4301, EN 1.4301, ASTM 304, UNS S30400, JIS SUS 304, ISO 4301-304-00-I, BS 304S31
ApplicationManufacturing, Construction, School/College Workshop, For manufacturing Flanges, Fittings, Valves, Couplings, Rings, Seals, Bolts, Nuts, Washers, Studs, Screws, Shafts, Disc, Hollow Bars
Single Piece Length3 meter, 6 meter

Jayant Impex Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer 304 Stainless Steel Round Bars.

304 is an austenitic steel alloys containing chromium and nickel, structured around the Type 302 composition of iron, 18% chromium, and 8% nickel. 304 Stainless Steel Round Bars are not hardenable by heat treatment. The most familiar stainless steel is probably Type 304, sometimes called T304 or simply 304. Type 304 surgical stainless steel is austenitic steel containing 18-20% chromium and 8-10% nickel.

304 Stainless Steel Round Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

Size Specifications: Can offer 304 Stainless Steel Round Bars in size range of 3mm upto 400mm in diameter.

304 Stainless Steel Round Bars as annealed condition physical properties are as below:

Ultimate Tensile Strength, psi: 73,200

Yield Strength, psi: 31,200

Elongation: 70%

Rockwell Hardness: B70

Different Standards of 304 Stainless Steel Round Bars:

Outokumpu 4301, EN 1.4301, ASTM 304, UNS S30400, JIS SUS 304, ISO 4301-304-00-I, BS 304S31, DIN 1.4301, NF Z7 CN 18-09, SS 2333, GB 0Cr18Ni9, KS STS 304, GOST 08X18H10, B.S. 302 S 17, B.S. 304 S 15, B.S. 304 S 16, B.S. 304 S 18, B.S. 304 S 25, B.S. 304 S 40, B.S. En.58 E, AMS 5501, AMS 5513, AMS 5560, AMS 5565, AMS 5566, AMS 5567, AMS 5639, AMS 5697, ASME SA182, ASME SA194 (Type 8), ASME SA213, ASME SA240, ASME SA249, ASME SA312, ASME SA320 (B8), ASME SA358, ASME SA376, ASME SA403, ASME SA409, ASME SA430, ASME SA479, ASME SA688, ASTM A167, ASTM A182, ASTM A193, ASTM A194, ASTM A213, ASTM A240, ASTM A249, ASTM A269, ASTM A270, ASTM A271, ASTM A276, ASTM A312, ASTM A313, ASTM A314, ASTM A320, ASTM A368, ASTM A376, ASTM A409, ASTM A430, ASTM A473, ASTM A478, ASTM A479, ASTM A492, ASTM A493, ASTM A511, ASTM A554, ASTM A580, ASTM A632, ASTM A651, ASTM A666, ASTM A688, FED QQ-S-763, FED QQ-S-766, FED QQ-W-423, FED STD-66, MIL SPEC M.IL-S-5059, MIL SPEC MIL-F-20138, MIL SPEC MIL-S-23195, MIL SPEC MIL-S-23196, MIL SPEC MIL-S-862, MIL SPEC MIL-S-862, MIL SPEC MIL-T-6845, MIL SPEC MIL-T-8504, MIL SPEC MIL-T-8506, SAE 30304, SAE J405 (30304), UNI X 5 CrNi 18 10

We stock, supply, export, wholesale 304 Stainless Steel Round Bars which are used in applications as mentioned below:

Food processing equipment, particularly in beer brewing, milk processing, and wine making

Kitchen benches, sinks, troughs, equipment, and appliances

Architectural trim and molding

Automotive and aerospace structural use

Construction material in large buildings

Chemical containers, including for transport

Heat exchangers

Nuts, bolts, screws, and other fasteners in the marine environment

Dyeing industry

Woven or welded screens for mining, quarrying & water filtration

We can supply smaller quantities of 304 Stainless Steel Round Bars from our associated manufacturing unit in India.

If any requirements for 304 Stainless Steel Round Bars kindlydo contact us.



Additional Information:

  • Item Code: 304-stainless-steel-round-bar-ss-304-round-bars-304-round
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Nhavasheva, Khopoli, Mumbai, India
  • Delivery Time: Immediate if ready stock
Yes! I am interested

309 Stainless Steel Round Bar

REQUEST CALLBACK

309 Stainless Steel Round Bar
Approx. INR 400 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity500 Kilogram
309 Stainless Steel Round Bar FinishRolled, Forged, Annealed, Black, Bright, Peeled, Proof Machined
Chemical Composition(Chemistry) of 309 Stainless SteelC: 0.20, Mn: 2.00, Si: 1.00, Cr: 22.0-24.0, Ni: 12.0-15.0, P: 0.045, S: 0.03
Third Party InspectionCan be done at an extra cost
Payment TermsStrictly against proforma invoice. Sorry no credits.
Payment ModePay TM, Cheque, RTGS, NEFT, T/T, Reputed Bank Irrevocable Confirmed Bank L/C.
Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch
BrandImported (No MTC for imported material will be given). NABL laboratory reports possible.
Material GradeOutokumpu 4828, EN 1.4828, JIS SUH 309, ISO 4828-305-09-I, DIN 1.4828, NF Z17 CNS 20-12, UNS S30900
Single Piece Length3 meter, 6 meter

Jayant Impex Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer 309 Stainless Steel Round Bars.

AISI 309 stainless steel is an alloy of iron, further classified as an austenitic stainless steel. 309 is the AISI designation for this material. 1.4828 is the EN numeric designation. S30900 is the UNS number. Additionally, the EN chemical designation is X15CrNiSi 20-12. It has two common variants, each represented as a separate material.

309 Stainless Steel Round Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

Size Specifications: Can offer 309 Stainless Steel Round Bars in size range of 3mm upto 250mm in diameter.

Different Standards of 309 Stainless Steel Round Bars:

Outokumpu 4828, EN 1.4828, JIS SUH 309, ISO 4828-305-09-I, DIN 1.4828, NF Z17 CNS 20-12, GB 1Cr20Ni14Si2, GOST 08X20H14C2, UNI x 16 CrNi 23 14, ASME SA249 , ASME SA312 , ASME SA358 , ASME SA403 , ASME SA409 , ASTM A167 , ASTM A249 , ASTM A276 , ASTM A312 , ASTM A314 , ASTM A358 , ASTM A403 , ASTM A409 , ASTM A473 , ASTM A511 , ASTM A554 , ASTM A580 , FED QQ-S-763 , FED QQ-S-766 , MIL SPEC MIL-S-862 , SAE 30309 , SAE J405 (30309) , UNS S30900

Similar Alloys:

AISI 309H (S30909) Stainless Steel

AISI 309S (1.4833, S30908) Stainless Steel

AISI 309Cb (S30940) Stainless Steel

ACI-ASTM CH20 (SCS17, J93402) Cast Stainless Steel

AISI 317 (S31700) Stainless Steel

Corrosion Resistance properties of 309 Stainless Steel Round Bars:

Provide excellent corrosion resistance

More resistant to marine atmospheres than Alloy 304

Often used at higher temperatures to take advantage of their oxidation resistance

Have high resistance to sulfite liquors

Generally considered heat resistant alloys

Destructive scaling temperature is approximately 2000oF

Good scaling resistance with regard to continuous and intermittent service

Heat Treatment properties of 309 Stainless Steel Round Bars:

Cannot be hardened through heat treatment because the consist solely of austenite at room temperature

Higher tensile and yield strengths that can be obtained through cold working and not followed by full annealing are not stable at the higher temperatures where these alloys are used

Creep properties can be negatively affected by the use of cold worked material at these higher temperatures

We stock, supply, export, wholesale 309 Stainless Steel Round Bars which are used in applications as mentioned below:

Heating elements

Aircraft and jet engine parts

Heat exchangers

Carburizing annealing products

Sulfite liquor handling equipment

Kiln liners

Boiler baffles

Refinery and chemical processing equipment

Auto exhaust parts

We can supply smaller quantities of 309 Stainless Steel Round Bars from our associated manufacturing unit in India.

If any requirements for 309 Stainless Steel Round Bars kindlydo contact us.



Additional Information:

  • Item Code: 309-stainless-steel-round-bar-ss-309-round-bars-309-round
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Nhavasheva, Khopoli, Mumbai, India
  • Delivery Time: Immediate if ready stock
Yes! I am interested

310 Stainless Steel Round Bar

REQUEST CALLBACK

310 Stainless Steel Round Bar
Approx. INR 400 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity500 Kilogram
310 Stainless Steel Round Bars FinishRolled, Forged, Annealed, Black, Bright, Peeled, Proof Machined
Third Party InspectionCan be done at an extra cost
Payment TermsStrictly against proforma invoice. Sorry no credits.
Payment ModePay TM, Cheque, RTGS, NEFT, T/T, Reputed Bank Irrevocable Confirmed Bank L/C.
Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch
BrandIndian, Imported (No MTC for imported material will be given). NABL laboratory reports possible.
Material GradeOutokumpu 4845, EN 1.4845, ASTM 310S, UNS S31008, JIS SUS 310S, ISO 4845-310-08-E, DIN 1.4845
ApplicationManufacturing, Construction, School/College Workshop, For manufacturing Flanges
Single Piece Length3 meter, 6 meter

Jayant Impex Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer 310 Stainless Steel Round Bars.

AISI 310 stainless steel is an alloy of iron, further classified as an austenitic stainless steel. 310 is the AISI designation for this material. 1.4845 is the EN numeric designation. S31000 is the UNS number. Additionally, the EN chemical designation is X8CrNi25-21.It has two common variants, each represented as a separate material. 

310 Stainless Steel Round Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer 310 Stainless Steel Round Bars in size range of 3mm upto 250mm in diameter.

 

310 Stainless Steel Round Bars as annealed condition physical properties are as below:

Ultimate Tensile Strength, psi: 75000

Yield Strength, psi: 30000

Elongation: 40%

Rockwell Hardness: 95

 

Different Standards of 310 Stainless Steel Round Bars:

Outokumpu 4845, EN 1.4845, ASTM 310S, UNS S31008, JIS SUS 310S, ISO 4845-310-08-E, DIN 1.4845, NF Z8 CN 25-20, SS 2361, GB 0Cr25Ni20, GOST 10X23H18, UNI X 16 CrNiSi 25 20 , UNI X 22 CrNi 25 20, B.S. 310 S 24, AMS 5694 , AMS 5695 , ASME SA182 , ASME SA213 , ASME SA249 , ASME SA312 , ASME SA358 , ASME SA403 , ASME SA409 , ASTM A167 , ASTM A182 , ASTM A213 , ASTM A249 , ASTM A276 , ASTM A312 , ASTM A314 , ASTM A358 , ASTM A403 , ASTM A409 , ASTM A473 , ASTM A511 , ASTM A580 , ASTM A632 , FED QQ-S-763 , FED QQ-S-766 , FED QQ-W-423 , FED STD-66 , MIL SPEC MIL-S-862 , SAE 30310 , SAE J405 (30310) , UNS S31000

 

Similar Alloys:

AISI 310S (1.4842, S31008) Stainless Steel

ACI-ASTM CK20 (J94202) Cast Stainless Steel

AISI 310H (S31009) Stainless Steel

AISI 310Cb (S31040) Stainless Steel

AISI 314 (1.4841) Stainless Steel

 

Corrosion Resistance properties of 310 Stainless Steel Round Bars:

Provides excellent corrosion resistance

High chromium content allows for good aqueous corrosion resistance

Excellent resistance at normal temperatures and also has good resistance to oxidizing and carburizing atmospheres

 

Heat Resistance properties of 310 Stainless Steel Round Bars:

Good resistance to oxidation in intermittent service in air at temperatures up to 1040°C and 1150°C in continuous service.

Good resistance to thermal fatigue and cyclic heating.

Widely used where sulphur dioxide gas is encountered at elevated temperatures.

Continuous use in 425-860°C range not recommended due to carbide precipitation, if subsequent aqueous corrosion resistance is needed

Generally used at temperatures starting from about 800 or 900°C – above the temperatures at which 304H and 321 are effective.

 

We stock, supply, export, wholesale 310 Stainless Steel Round Bars which are used in applications as mentioned below:

Furnace Parts

Oil Burner Parts

Heat Exchangers

Welding Filler Wire and Electrodes

Annealing Covers

Combustion Tubes

Fire Box Sheets

 

We can supply smaller quantities of 310 Stainless Steel Round Bars from our associated manufacturing unit in India.

 

If any requirements for 310 Stainless Steel Round Bars kindly do contact us.



Additional Information:

  • Item Code: 310-stainless-steel-round-bar-ss-310-round-bars-310-round
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Nhavasheva, Khopoli, Mumbai, India
  • Delivery Time: Immediate if ready stock
Yes! I am interested

316 Stainless Steel Plate

REQUEST CALLBACK

316 Stainless Steel Plate
Approx. INR 250 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity500 Kilogram
Surface Finish of Stainless Steel 316 PlateNo.1, No.3, No.4, No.8, 2B, BA, 2E, Scotch Brite, Embossing, Anti-fingerprint, Etching
Width of Stainless Steel 316 Plate1000 mm, 1250 mm, 1270 mm and 1600 mm. Any other customized Width in ranges from 21 mm to 1600 mm
Length of Stainless Steel 316 Plate2000 mm, 2500 mm, 5000 mm and 6000 mm. Any other customized Length in ranges from 400 mm to 6000 mm
Third Party InspectionCan be done at an extra cost
Payment TermsStrictly against proforma invoice. Sorry no credits.
Payment ModePay TM, Cheque, RTGS, NEFT, T/T, Reputed Bank Irrevocable Confirmed Bank L/C.
Size (feet X feet)4 x 8
Thickness>5 mm
BrandJindal, Imported (No MTC for imported material will be given). NABL laboratory reports possible.
Material GradeOutokumpu 4401, EN 1.4401, ASTM 316, UNS S31600, JIS SUS 316, ISO 4401-316-00-I, BS 316S31

Jayant Impex Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer 316 Stainless Steel Plate.

316 (UNS S31600) is molybdenum-bearing austenitic stainless steels which is more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Type 304. These alloy also offer higher creep, stress-to-rupture and tensile strength at elevated temperature. In addition to excellent corrosion resistance and strength properties, 316 alloy also provide the excellent fabricability and formability which are typical of the austenitic stainless steels.

316 Stainless Steel Plates can be avail as hot rolled in annealed & pickled condition.

Size Specifications: Can offer 316 Stainless Steel Plate in size range as mentioned below:

Thickness: 5mm upto 80mm

Width: 1000 mm, 1250 mm, 1270 mm and 1600 mm. Any other customized Width in ranges from 21 mm to 1600 mm

Length: 2000 mm, 2500 mm, 5000 mm and 6000 mm. Any other customized Length in ranges from 400 mm to 6000 mm

 

Surface Finishes that can be offered for 316 Stainless Steel Plates are as follows:

No. 1: Hot rolled annealed, shot blasted and pickled

2B: Cold rolled annealed and pickled and skin passed

BA: Bright annealed finish; processed with bright heat treatment after cold rolling

No. 3: Cold rolled annealed and pickled and polished with 100 to 120 grit

No. 4: Cold rolled annealed and pickled and polished with 150 to 180 grit

Scotch Brite: Very fine hairline finish generated by polishing with rolls made out of scotch brite material

Embossing: Cold rolled annealed and pickled; given an appropriate embossed luster by embossing process

Anti-fingerprint: Cold rolled annealed and pickled and coated with Acrylic Solution

No. 8 / Mirror: Cold rolled annealed and pickled and polished to mirror finish

Etching: Cold rolled annealed and pickled and pattern surface

2E: Cold rolled, heat treated, mechanically descaled and pickled

Different Designations of 316 Stainless Steel Plate:

Outokumpu 4401, EN 1.4401, ASTM 316, UNS S31600, JIS SUS 316, ISO 4401-316-00-I, BS 316S31, DIN 1.4401, NF Z7 CND 17-11-02, SS 2347, GB 0Cr17Ni12Mo2, KS STS 316, UNI X 5 CrNIMo 17 12, B.S. 316 S 16 , B.S. 316 S 18, B.S. 316 S 25, B.S. 316 S 26, B.S. 316 S 30, B.S. 316 S 40, B.S. 316 S 41, B.S. En. 58 H, AMS 5524, AMS 5573, AMS 5648, AMS 5690, AMS 5691, ASME SA182, ASME SA193, ASME SA194, ASME SA213, ASME SA240, ASME SA249, ASME SA312, ASME SA320, ASME SA358, ASME SA376, ASME SA403, ASME SA409, ASME SA430, ASME SA479, ASME SA688, ASTM A167, ASTM A182, ASTM A193, ASTM A194, ASTM A213, ASTM A240, ASTM A249, ASTM A269, ASTM A276, ASTM A312, ASTM A313, ASTM A314, ASTM A320, ASTM A358, ASTM A368, ASTM A376, ASTM A403, ASTM A409, ASTM A430, ASTM A473, ASTM A478, ASTM A479, ASTM A580, FED QQ-S-763, FED QQ-S-766, FED QQ-W-423, MIL SPEC MIL-S-5059, MIL SPEC MIL-S-862, SAE 30316, SAE J405 (30316), UNS S31600

We stock, supply, export, wholesale 316 Stainless Steel Plate which are used in applications as mentioned below:

Acetic acid compounds, brandy vats, corn products refining equipment, fasteners, kettles for cooking ketchup, pharmaceutical processing equipment, phosphate industry parts, photographic film processing equipment, pitting-corrosion resistance, pulp and paper processing equipment, smokestacks, textile finishing equipment, textile mill kiers, water softener tanks, wire cloth.

We can supply smaller quantities of 316 Stainless Steel Plate from our associated manufacturing unit in India.

If any requirements for 316 Stainless Steel Plate kindlydo contact us.



Additional Information:

  • Item Code: 316-stainless-steel-plate-ss-316-plates-316-stainless-plates
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Nhavasheva, Khopoli, Mumbai, India
  • Delivery Time: Immediate if ready stock
Yes! I am interested

316 Stainless Steel Sheet

REQUEST CALLBACK

316 Stainless Steel Sheet
Approx. INR 260 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity500 Kilogram
Surface Finish of 316 Stainless Steel SheetNo.1, No.3, No.4, No.8, 2B, BA, 2E, Scotch Brite, Embossing, Anti-fingerprint, Etching
Width of 316 Stainless Steel Sheet1000 mm, 1250 mm, 1270 mm and 1600 mm. Any other customized Width in ranges from 21 mm to 1600 mm
Length of 316 Stainless Steel Sheet2000 mm, 2500 mm, 5000 mm and 6000 mm. Any other customized Length in ranges from 400 mm to 6000 mm
Third Party InspectionCan be done at an extra cost
Payment TermsStrictly against proforma invoice. Sorry no credits.
Payment ModePay TM, Cheque, RTGS, NEFT, T/T, Reputed Bank Irrevocable Confirmed Bank L/C.
Hot Rolled 316 Stainless Steel Sheet Thickness1.45mm upto 6mm
Cold Rolled 316 Stainless Steel Sheet Thickness0.40mm upto 5mm
Size (feet X feet)4 x 8
Thickness0-1 mm, 1-2 mm, 2-3 mm, 3-4 mm, 4-5 mm
BrandJindal, Imported (No MTC for imported material will be given). NABL laboratory reports possible.
Material GradeOutokumpu 4401, EN 1.4401, ASTM 316, UNS S31600, JIS SUS 316, ISO 4401-316-00-I, BS 316S31

Jayant Impex Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer 316 Stainless Steel Sheet.

316 stainless steel sheets are part of the austenitic family of stainless steel and is the most widely used & contains a higher level of Nickel than 304 giving it an improved corrosion resistance over 304 grades. 316 sheet is a good option for marine applications due to a good atmospheric corrosion resistance.

316 Stainless Steel Sheet can be avail as hot & cold rolled in annealed & pickled condition.

Size Specifications: Can offer 316 Stainless Steel Sheet in size range as mentioned below:

Hot Rolled Thickness: 1.45mm upto 6mm

Cold Rolled Thickness: 0.40mm upto 5mm

Width: 1000 mm, 1250 mm, 1270 mm and 1600 mm. Any other customized Width on HR/CR ranges from 21 mm to 1600 mm

Length: 2000 mm, 2500 mm, 5000 mm and 6000 mm. Any other customized Length on HR/CR ranges from 400 mm to 6000 mm

Surface Finishes that can be offered for 316 Stainless Steel Sheet are as follows:

No. 1: Hot rolled annealed, shot blasted and pickled

2B: Cold rolled annealed and pickled and skin passed

BA: Bright annealed finish; processed with bright heat treatment after cold rolling

No. 3: Cold rolled annealed and pickled and polished with 100 to 120 grit

No. 4: Cold rolled annealed and pickled and polished with 150 to 180 grit

Scotch Brite: Very fine hairline finish generated by polishing with rolls made out of scotch brite material

Embossing: Cold rolled annealed and pickled; given an appropriate embossed luster by embossing process

Anti-fingerprint: Cold rolled annealed and pickled and coated with Acrylic Solution

No. 8 / Mirror: Cold rolled annealed and pickled and polished to mirror finish

Etching: Cold rolled annealed and pickled and pattern surface

2E: Cold rolled, heat treated, mechanically descaled and pickled

316 Stainless Steel Sheet as annealed condition physical properties are as below:

Tensile Min: 70000 Psi

Yield Min: 25000 Psi

Elongation Min: 40%

Hardness Max: 92 HRB

Different Designations of 316 Stainless Steel Sheet:

Outokumpu 4401, EN 1.4401, ASTM 316, UNS S31600, JIS SUS 316, ISO 4401-316-00-I, BS 316S31, DIN 1.4401, NF Z7 CND 17-11-02, SS 2347, GB 0Cr17Ni12Mo2, KS STS 316, UNI X 5 CrNIMo 17 12, B.S. 316 S 16 , B.S. 316 S 18, B.S. 316 S 25, B.S. 316 S 26, B.S. 316 S 30, B.S. 316 S 40, B.S. 316 S 41, B.S. En. 58 H, AMS 5524, AMS 5573, AMS 5648, AMS 5690, AMS 5691, ASME SA182, ASME SA193, ASME SA194, ASME SA213, ASME SA240, ASME SA249, ASME SA312, ASME SA320, ASME SA358, ASME SA376, ASME SA403, ASME SA409, ASME SA430, ASME SA479, ASME SA688, ASTM A167, ASTM A182, ASTM A193, ASTM A194, ASTM A213, ASTM A240, ASTM A249, ASTM A269, ASTM A276, ASTM A312, ASTM A313, ASTM A314, ASTM A320, ASTM A358, ASTM A368, ASTM A376, ASTM A403, ASTM A409, ASTM A430, ASTM A473, ASTM A478, ASTM A479, ASTM A580, FED QQ-S-763, FED QQ-S-766, FED QQ-W-423, MIL SPEC MIL-S-5059, MIL SPEC MIL-S-862, SAE 30316, SAE J405 (30316), UNS S31600

We stock, supply, export, wholesale 316 Stainless Steel Sheet which are used in applications as mentioned below:

Food processing

Marine

Chemical process vessels

Pharmaceutical equipment

We can supply smaller quantities of 316 Stainless Steel Sheet from our associated manufacturing unit in India.

If any requirements for 316 Stainless Steel Sheet kindlydo contact us.



Additional Information:

  • Item Code: 316-stainless-steel-sheet-ss-316-sheets-316-stainless-sheets
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Nhavasheva, Khopoli, Mumbai, India
  • Delivery Time: Immediate if ready stock
Yes! I am interested

Abrasion Resistant Steel Plates

REQUEST CALLBACK

Abrasion Resistant Steel Plates
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

ABREX Steel Plates

REQUEST CALLBACK

ABREX Steel Plates
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Alloy Steel Bars

REQUEST CALLBACK

Alloy Steel Bars
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Alloy Steel Rod

REQUEST CALLBACK

Alloy Steel Rod
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Alloyed Steel Round Bar

REQUEST CALLBACK

Alloyed Steel Round Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

BP Sheet

REQUEST CALLBACK

BP Sheet
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Bright Steel Flat Bars

REQUEST CALLBACK

Bright Steel Flat Bars
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Bright Steel Round Bar

REQUEST CALLBACK

Bright Steel Round Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Carbon Steel Bars

REQUEST CALLBACK

Carbon Steel Bars
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Carbon Steel Plates

REQUEST CALLBACK

Carbon Steel Plates
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Carbon Steel Round Bars

REQUEST CALLBACK

Carbon Steel Round Bars
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Carbon Steel Sheets

REQUEST CALLBACK

Carbon Steel Sheets
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Chequered Plate

REQUEST CALLBACK

Chequered Plate
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc.

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Coated Steel Sheet

REQUEST CALLBACK

Coated Steel Sheet
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Corten Steel Plate

REQUEST CALLBACK

Corten Steel Plate
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

CRC Steel Sheet

REQUEST CALLBACK

CRC Steel Sheet
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

CRCA Sheets

REQUEST CALLBACK

CRCA Sheets
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

CRCA Steel Sheet

REQUEST CALLBACK

CRCA Steel Sheet
Approx. INR 2500 / Pieces
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc.



Additional Information:

  • Minimum Order Quantity: 1 Pieces
Yes! I am interested

CRGO Steel Sheets

REQUEST CALLBACK

CRGO Steel Sheets
Approx. INR 2500 / Pieces
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Pieces
Yes! I am interested

Die Steel Rod

REQUEST CALLBACK

Die Steel Rod
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

DIN 975 Threaded Rod

REQUEST CALLBACK

DIN 975 Threaded Rod
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Duplex Steel Bar

REQUEST CALLBACK

Duplex Steel Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Duplex Steel Plate

REQUEST CALLBACK

Duplex Steel Plate
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Duplex Steel Sheet

REQUEST CALLBACK

Duplex Steel Sheet
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

En Series Steel Bars

REQUEST CALLBACK

En Series Steel Bars
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc.

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

EN24 Steel Bar

REQUEST CALLBACK

EN24 Steel Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Equal Angle Bars

REQUEST CALLBACK

Equal Angle Bars
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Galvanized Steel Sheets

REQUEST CALLBACK

Galvanized Steel Sheets
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

GC Sheets

REQUEST CALLBACK

GC Sheets
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

GP Sheets

REQUEST CALLBACK

GP Sheets
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

GPGC Sheets

REQUEST CALLBACK

GPGC Sheets
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Hardox Plates

REQUEST CALLBACK

Hardox Plates
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

HCHCR Rods

REQUEST CALLBACK

HCHCR Rods
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Hexagonal Bright Steel Bars

REQUEST CALLBACK

Hexagonal Bright Steel Bars
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Hexagonal Stainless Steel Bars

REQUEST CALLBACK

Hexagonal Stainless Steel Bars
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

High Manganese Steel Plate

REQUEST CALLBACK

High Manganese Steel Plate
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

High Nickel Alloys Steel Plate

REQUEST CALLBACK

High Nickel Alloys Steel Plate
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

High Speed Steel Rod

REQUEST CALLBACK

High Speed Steel Rod
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

High Tensile Steel Plate

REQUEST CALLBACK

High Tensile Steel Plate
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Hot Die Steel Bar

REQUEST CALLBACK

Hot Die Steel Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Hot Dipped Galvanized Steel Sheets

REQUEST CALLBACK

Hot Dipped Galvanized Steel Sheets
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Hot Rolled Stainless Steel Sheet

REQUEST CALLBACK

Hot Rolled Stainless Steel Sheet
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Hot Rolled Steel Angle Bar

REQUEST CALLBACK

Hot Rolled Steel Angle Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Hot Rolled Steel Plate

REQUEST CALLBACK

Hot Rolled Steel Plate
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

HR Steel Sheet

REQUEST CALLBACK

HR Steel Sheet
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Jindal Steel Sheets

REQUEST CALLBACK

Jindal Steel Sheets
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Manganese Steel Sheet

REQUEST CALLBACK

Manganese Steel Sheet
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Mild Steel Bars

REQUEST CALLBACK

Mild Steel Bars
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Mild Steel Bright Bar

REQUEST CALLBACK

Mild Steel Bright Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Mild Steel Chequered Plates

REQUEST CALLBACK

Mild Steel Chequered Plates
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Mild Steel Cold Rolled Sheet

REQUEST CALLBACK

Mild Steel Cold Rolled Sheet
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc.

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Mild Steel Flat Bar

REQUEST CALLBACK

Mild Steel Flat Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Mild Steel Hexagon Bar

REQUEST CALLBACK

Mild Steel Hexagon Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Mild Steel Hot Rolled Sheet

REQUEST CALLBACK

Mild Steel Hot Rolled Sheet
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Mild Steel Rod

REQUEST CALLBACK

Mild Steel Rod
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc.

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Mild Steel Round Bar

REQUEST CALLBACK

Mild Steel Round Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Mild Steel Square Bar

REQUEST CALLBACK

Mild Steel Square Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Mild Steel Threaded Rod

REQUEST CALLBACK

Mild Steel Threaded Rod
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Mirror Finish Stainless Steel Sheet

REQUEST CALLBACK

Mirror Finish Stainless Steel Sheet
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc.

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

MS Chequered Plate

REQUEST CALLBACK

MS Chequered Plate
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

MS Plates

REQUEST CALLBACK

MS Plates
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

MS Sheet

REQUEST CALLBACK

MS Sheet
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Non Magnetic Stainless Steel Plate

REQUEST CALLBACK

Non Magnetic Stainless Steel Plate
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with PVC  coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Oil Hardened Steel Bars

REQUEST CALLBACK

Oil Hardened Steel Bars
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc.

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Peeled Bar

REQUEST CALLBACK

Peeled Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Prepainted Galvanized Steel Sheet

REQUEST CALLBACK

Prepainted Galvanized Steel Sheet
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Pressure Vessel Steel Plate

REQUEST CALLBACK

Pressure Vessel Steel Plate
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Quenched Steel Plate

REQUEST CALLBACK

Quenched Steel Plate
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Round Steel Bar

REQUEST CALLBACK

Round Steel Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Sail Hard Plate

REQUEST CALLBACK

Sail Hard Plate
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Silver Steel Bar

REQUEST CALLBACK

Silver Steel Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc.

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Spring Steel Round Bar

REQUEST CALLBACK

Spring Steel Round Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

SS 304 Grade Uns S30400 Plate

REQUEST CALLBACK

SS 304 Grade Uns S30400 Plate
Approx. INR 200 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity400 Kilogram
Chemical Composition(Chemistry) of ss 304 grade uns s30400 plateC: 0.08 max, Cr: 18 - 20, Fe: 66.34-74, Mn: 2 max, Ni: 8-10.5, P: 0.045 max, S: 0.03 max, Si:1 max
Surface Finish of ss 304 grade uns s30400 plateNo.1, No.3, No.4, No.8, 2B, BA, 2E, Scotch Brite, Embossing, Anti-fingerprint, Etching
Width of ss 304 grade uns s30400 plate1000 mm, 1250 mm, 1270 mm and 1600 mm. Any other customized Width in ranges from 21 mm to 1600 mm
Length of ss 304 grade uns s30400 plate2000 mm, 2500 mm, 5000 mm and 6000 mm. Any other customized Length in ranges from 400 mm to 6000 mm
Size (feet X feet)4 x 8
Thickness>5 mm
BrandJindal, Imported (No MTC for imported material will be given). NABL laboratory reports possible.
Material GradeOutokumpu 4301, EN 1.4301, ASTM 304, UNS S30400, JIS SUS 304, ISO 4301-304-00-I, BS 304S31
Surface TreatmentAnealed, Pickled , Hot Rolled

Jayant Impex Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer SS 304 Grade Uns S30400 Plate.

AISI 304 stainless steel is an alloy of iron, further classified as an austenitic stainless steel. 304 is the AISI designation for this material. 1.4301 is the EN numeric designation. S30400 is the UNS number. Additionally, the EN chemical designation is X5CrNi18-10. And the British Standard (BS) designation is 304S15. It has five common variants, each represented as a separate material.

SS 304 Grade Uns S30400 Plate can be avail as hot rolled in annealed & pickled condition.

Size Specifications: Can offer SS 304 Grade Uns S30400 Plate in size range as mentioned below:

Thickness: 5mm upto 80mm

Width: 1000 mm, 1250 mm, 1270 mm and 1600 mm. Any other customized Width in ranges from 21 mm to 1600 mm

Length: 2000 mm, 2500 mm, 5000 mm and 6000 mm. Any other customized Length in ranges from 400 mm to 6000 mm

Surface Finishes that can be offered for SS 304 Grade Uns S30400 Plate are as follows:

No. 1: Hot rolled annealed, shot blasted and pickled

2B: Cold rolled annealed and pickled and skin passed

BA: Bright annealed finish; processed with bright heat treatment after cold rolling

No. 3: Cold rolled annealed and pickled and polished with 100 to 120 grit

No. 4: Cold rolled annealed and pickled and polished with 150 to 180 grit

Scotch Brite: Very fine hairline finish generated by polishing with rolls made out of scotch brite material

Embossing: Cold rolled annealed and pickled; given an appropriate embossed luster by embossing process

Anti-fingerprint: Cold rolled annealed and pickled and coated with Acrylic Solution

No. 8 / Mirror: Cold rolled annealed and pickled and polished to mirror finish

Etching: Cold rolled annealed and pickled and pattern surface

2E: Cold rolled, heat treated, mechanically descaled and pickled

SS 304 Grade Uns S30400 Plate as annealed condition physical properties are as below:

Tensile Min: 75000 Psi

Yield Min: 30000 Psi

Elongation Min: 40%

Hardness Max: 95 HRB

We stock, supply, export, wholesale SS 304 Grade Uns S30400 Plate which are used in applications as mentioned below:

Food processing equipment, particularly in beer brewing, milk processing, and wine making

Kitchen benches, sinks, troughs, equipment, and appliances

Architectural trim and molding

Automotive and aerospace structural use

Construction material in large buildings

Chemical containers, including for transport

Heat exchangers

Nuts, bolts, screws, and other fasteners in the marine environment.

We can supply smaller quantities of SS 304 Grade Uns S30400 Plate from our associated manufacturing unit in India.

If any requirements for SS 304 Grade Uns S30400 Plate kindlydo contact us.



Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Delivery Time: Immediate if ready stock
  • Packaging Details: Nhavasheva, Khopoli, Mumbai, India

    ss-304-grade-uns-s30400-plate-1.4301-plates-ams-5501-plates
Yes! I am interested

Stainless Steel 304 Plate

REQUEST CALLBACK

Stainless Steel 304 Plate
Approx. INR 200 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity500 Kilogram
Chemical CompositionC: 0.08 max, Cr: 18 - 20, Fe: 66.34-74, Mn: 2 max, Ni: 8-10.5, P: 0.045 max, S: 0.03 max, Si:1 max
Surface FinishNo.1, No.3, No.4, No.8, 2B, BA, 2E, Scotch Brite, Embossing, Anti-fingerprint, Etching
Width1000 mm, 1250 mm, 1270 mm and 1600 mm. Any other customized Width in ranges from 21 mm to 1600 mm
Length2000 mm, 2500 mm, 5000 mm and 6000 mm. Any other customized Length in ranges from 400 mm to 6000 mm
Size (feet X feet)4 x 8
Thickness>5 mm
BrandJindal, Imported (No MTC for imported material will be given). NABL laboratory reports possible.
Material GradeOutokumpu 4301, EN 1.4301, ASTM 304, UNS S30400, JIS SUS 304, ISO 4301-304-00-I, BS 304S31
Surface TreatmentAnealed, Pickled , Hot Rolled

Jayant Impex Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer Stainless Steel 304 Plate.

304 (UNS S30400) are austenitic steels containing chromium and nickel element & are not hardenable by heat treatment. The most familiar stainless steel is probably Type 304, sometimes called T304 or simply 304. Type 304 surgical stainless steel is austenitic steel containing 18-20% chromium and 8-10% nickel.

Stainless Steel 304 Plate can be avail as hot rolled in annealed & pickled condition.

Surface Finishes that can be offered for Stainless Steel 304 Plate are as follows:

No. 1: Hot rolled annealed, shot blasted and pickled

2B: Cold rolled annealed and pickled and skin passed

BA: Bright annealed finish; processed with bright heat treatment after cold rolling

No. 3: Cold rolled annealed and pickled and polished with 100 to 120 grit

No. 4: Cold rolled annealed and pickled and polished with 150 to 180 grit

Scotch Brite: Very fine hairline finish generated by polishing with rolls made out of scotch brite material

Embossing: Cold rolled annealed and pickled; given an appropriate embossed luster by embossing process

Anti-fingerprint: Cold rolled annealed and pickled and coated with Acrylic Solution

No. 8 / Mirror: Cold rolled annealed and pickled and polished to mirror finish

Etching: Cold rolled annealed and pickled and pattern surface

2E: Cold rolled, heat treated, mechanically descaled and pickled

Size Specifications: Can offer Stainless Steel 304L Plate with Thickness ranging from 5mm upto 80mm.

Different Designations of Stainless Steel 304 Plate:

Outokumpu 4301, EN 1.4301, ASTM 304, UNS S30400, JIS SUS 304, ISO 4301-304-00-I, BS 304S31, DIN 1.4301, NF Z7 CN 18-09, SS 2333, GB 0Cr18Ni9, KS STS 304, GOST 08X18H10, B.S. 302 S 17 , B.S. 304 S 15 , B.S. 304 S 16 , B.S. 304 S 18 , B.S. 304 S 25 , B.S. 304 S 40 , B.S. En.58 E, AMS 5501 , AMS 5513 , AMS 5560 , AMS 5565 , AMS 5566 , AMS 5567 , AMS 5639 , AMS 5697 , ASME SA182 , ASME SA194 (Type 8) , ASME SA213 , ASME SA240 , ASME SA249 , ASME SA312 , ASME SA320 (B8) , ASME SA358 , ASME SA376 , ASME SA403 , ASME SA409 , ASME SA430 , ASME SA479 , ASME SA688 , ASTM A167 , ASTM A182 , ASTM A193 , ASTM A194 , ASTM A213 , ASTM A240 , ASTM A249 , ASTM A269 , ASTM A270 , ASTM A271 , ASTM A276 , ASTM A312 , ASTM A313 , ASTM A314 , ASTM A320 , ASTM A368 , ASTM A376 , ASTM A409 , ASTM A430 , ASTM A473 , ASTM A478 , ASTM A479 , ASTM A492 , ASTM A493 , ASTM A511 , ASTM A554 , ASTM A580 , ASTM A632 , ASTM A651 , ASTM A666 , ASTM A688 , FED QQ-S-763 , FED QQ-S-766 , FED QQ-W-423 , FED STD-66 , MIL SPEC M.IL-S-5059 , MIL SPEC MIL-F-20138 , MIL SPEC MIL-S-23195 , MIL SPEC MIL-S-23196 , MIL SPEC MIL-S-862 , MIL SPEC MIL-S-862 , MIL SPEC MIL-T-6845 , MIL SPEC MIL-T-8504 , MIL SPEC MIL-T-8506 , SAE 30304 , SAE J405 (30304) , UNI X 5 CrNi 18 10

 

We stock, supply, export, wholesale Stainless Steel 304 Plate which are used in applications as mentioned below:

Kitchen benches, sinks, troughs, equipment, and appliances

Architectural trim and molding

Automotive and aerospace structural use

Construction material in large buildings

Nuts, bolts, screws, and other fasteners in the marine environment.

We can supply smaller quantities of Stainless Steel 304 Plate from our associated manufacturing unit in India.

If any requirements for Stainless Steel 304 Plate kindly do contact us.



Additional Information:

  • Item Code: stainless-steel-304-plate-ams-5513-60-65-66-67-5639-97-plate
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Nhavasheva, Khopoli, Mumbai, India
  • Delivery Time: Immediate if ready stock
Yes! I am interested

Stainless Steel 304 Round Bar

REQUEST CALLBACK

Stainless Steel 304 Round Bar
Approx. INR 200 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity500 Kilogram
FinishRolled, Forged, Annealed, Black, Bright, Peeled, Proof Machined
Third Party InspectionCan be done at an extra cost
Payment TermsStrictly against proforma invoice. Sorry no credits.
Payment ModePay TM, Cheque, RTGS, NEFT, T/T, Reputed Bank Irrevocable Confirmed Bank L/C.
Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch
BrandIndian, Imported (No MTC for imported material will be given). NABL laboratory reports possible.
Material GradeOutokumpu 4301, EN 1.4301, ASTM 304, UNS S30400, JIS SUS 304, ISO 4301-304-00-I, BS 304S31
ApplicationManufacturing, Construction, School/College Workshop, For manufacturing Flanges, Fittings, Valves, Couplings, Rings, Seals, Bolts, Nuts, Washers, Studs, Screws, Shafts, Disc, Hollow Bars, Fasteners
Single Piece Length3 meter, 6 meter

Jayant Impex Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer Stainless Steel 304 Round Bar.

304 Stainless Steel is the most commonly used stainless in the world. You can find it in everything from forks and knives to backsplashes. It is weldable, machinable with the right techniques, and has good corrosion resistance, but is not for use in salt water environments. This material is hardenable by cold work.

Stainless Steel 304 Round Bar can be avail rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

Size Specifications: Can offer Stainless Steel 304 Round Bar in size range of 3mm upto 400mm in diameter.

Stainless Steel 304 Round Bar as annealed condition physical properties are as below:

Tensile Min: 75 ksi

Yield Min: 30 ksi

Elongation Min: 40%

Hardness Max: 95 HRB

Different Standards of Stainless Steel 304 Round Bar:

Outokumpu 4301, EN 1.4301, ASTM 304, UNS S30400, JIS SUS 304, ISO 4301-304-00-I, BS 304S31, DIN 1.4301, NF Z7 CN 18-09, SS 2333, GB 0Cr18Ni9, KS STS 304, GOST 08X18H10, B.S. 302 S 17 , B.S. 304 S 15 , B.S. 304 S 16 , B.S. 304 S 18 , B.S. 304 S 25 , B.S. 304 S 40 , B.S. En.58 E, AMS 5501 , AMS 5513 , AMS 5560 , AMS 5565 , AMS 5566 , AMS 5567 , AMS 5639 , AMS 5697 , ASME SA182 , ASME SA194 (Type 8) , ASME SA213 , ASME SA240 , ASME SA249 , ASME SA312 , ASME SA320 (B8) , ASME SA358 , ASME SA376 , ASME SA403 , ASME SA409 , ASME SA430 , ASME SA479 , ASME SA688 , ASTM A167 , ASTM A182 , ASTM A193 , ASTM A194 , ASTM A213 , ASTM A240 , ASTM A249 , ASTM A269 , ASTM A270 , ASTM A271 , ASTM A276 , ASTM A312 , ASTM A313 , ASTM A314 , ASTM A320 , ASTM A368 , ASTM A376 , ASTM A409 , ASTM A430 , ASTM A473 , ASTM A478 , ASTM A479 , ASTM A492 , ASTM A493 , ASTM A511 , ASTM A554 , ASTM A580 , ASTM A632 , ASTM A651 , ASTM A666 , ASTM A688 , FED QQ-S-763 , FED QQ-S-766 , FED QQ-W-423 , FED STD-66 , MIL SPEC M.IL-S-5059 , MIL SPEC MIL-F-20138 , MIL SPEC MIL-S-23195 , MIL SPEC MIL-S-23196 , MIL SPEC MIL-S-862 , MIL SPEC MIL-S-862 , MIL SPEC MIL-T-6845 , MIL SPEC MIL-T-8504 , MIL SPEC MIL-T-8506 , SAE 30304 , SAE J405 (30304) , UNI X 5 CrNi 18 10

Corrosion Resistance Properties:

Resistance to moderately aggressive organic acids is a result of the 9 to 11% nickel that the 304 alloys contain.

Resistance to corrosion in oxidizing environments is a result of the 18 to 19% chromium that the 304 alloys contain.

The 304, 304L, and 304H may be considered to perform uniformly in most corrosive environments.

We stock, supply, export, wholesale Stainless Steel 304 Round Bar which are used in applications as mentioned below:

Food processing equipment, particularly in beer brewing, milk processing, and wine making

Kitchen benches, sinks, troughs, equipment, and appliances

Architectural trim and molding

Automotive and aerospace structural use

Construction material in large buildings

Chemical containers, including for transport

Heat exchangers

Nuts, bolts, screws, and other fasteners in the marine environment

We can supply smaller quantities of Stainless Steel 304 Round Bar from our associated manufacturing unit in India.

If any requirements for Stainless Steel 304 Round Bar kindlydo contact us.



Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Delivery Time: Immediate if ready stock
  • Packaging Details: stainless-steel-304-round-bar-1.4301-round-bars-304-rounds



    Nhavasheva, Khopoli, Mumbai, India
Yes! I am interested

Stainless Steel 304L Plate

REQUEST CALLBACK

Stainless Steel 304L Plate
Approx. INR 200 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity500 Kilogram
Chemical Composition(Chemistry) of Stainless Steel 304L PlateC: 0.03 max, Cr: 18 - 20, Fe: 66.34-74, Mn: 2 max, Ni: 8-10.5, P: 0.045 max, S: 0.03 max, Si:1 max
Surface Finish of Stainless Steel 304L PlateNo.1, No.3, No.4, No.8, 2B, BA, 2E, Scotch Brite, Embossing, Anti-fingerprint, Etching
Width of Stainless Steel 304L Plate1000 mm, 1250 mm, 1270 mm and 1600 mm. Any other customized Width in ranges from 21 mm to 1600 mm
Length of Stainless Steel 304L Plate2000 mm, 2500 mm, 5000 mm and 6000 mm. Any other customized Length in ranges from 400 mm to 6000 mm
Size (feet X feet)4 x 8
Thickness>5 mm
BrandJindal, Imported (No MTC for imported material will be given). NABL laboratory reports possible.
Material GradeOutokumpu 4307, EN 1.4307, ASTM 304L, UNS S30403, JIS SUS 304L, ISO 4301-304-03-I, BS 304S11
Surface TreatmentAnealed, Pickled , Hot Rolled

Jayant Impex Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer Stainless Steel 304L Plate.

304L (UNS S30403) are austenitic steels which are not hardenable by heat treatment. These stainless steel alloys are the most familiar and most frequently used alloys in the stainless steel family. L refers to low carbon content.

Stainless Steel 304L Plate can be avail as hot rolled in annealed & pickled condition.

 

Size Specifications: Can offer Stainless Steel 304L Plate in size range as mentioned below:

Thickness: 5mm upto 80mm

Width: 1000 mm, 1250 mm, 1270 mm and 1600 mm. Any other customized Width in ranges from 21 mm to 1600 mm

Length: 2000 mm, 2500 mm, 5000 mm and 6000 mm. Any other customized Length in ranges from 400 mm to 6000 mm

 

Surface Finishes that can be offered for Stainless Steel 304L Plate are as follows:

No. 1: Hot rolled annealed, shot blasted and pickled

2B: Cold rolled annealed and pickled and skin passed

BA: Bright annealed finish; processed with bright heat treatment after cold rolling

No. 3: Cold rolled annealed and pickled and polished with 100 to 120 grit

No. 4: Cold rolled annealed and pickled and polished with 150 to 180 grit

Scotch Brite: Very fine hairline finish generated by polishing with rolls made out of scotch brite material

Embossing: Cold rolled annealed and pickled; given an appropriate embossed luster by embossing process

Anti-fingerprint: Cold rolled annealed and pickled and coated with Acrylic Solution

No. 8 / Mirror: Cold rolled annealed and pickled and polished to mirror finish

Etching: Cold rolled annealed and pickled and pattern surface

2E: Cold rolled, heat treated, mechanically descaled and pickled

 

Stainless Steel 304L Plate as annealed condition physical properties are as below:

Tensile Min: 70000 Psi

Yield Min: 25000 Psi

Elongation Min: 40%

Hardness Max: 92 HRB

 

Different Designations of Stainless Steel 304L Plate:

Outokumpu 4307, EN 1.4307, ASTM 304L, UNS S30403, JIS SUS 304L, ISO 4301-304-03-I, BS 304S11, DIN 1.4307, NF Z7 CN 18-10, SS 2352, GB 00Cr19Ni10, KS STS 304L, GOST 08X18H11, UNI KG , UNI KW , UNI X 2 CrNi 18 11 , UNI X 3 CrNi 18 11, B.S. 304 S 12 , B.S. 304 S 14 , B.S. 304 S 22 , B.S. S. 536, AMS 5511 , AMS 5647 , ASME 8A182 , ASME SA213 , ASME SA240 , ASME SA249 , ASME SA312 , ASME SA403 , ASME SA479 , ASME SA688 , ASTM A167 , ASTM A182 , ASTM A213 , ASTM A240 , ASTM A249 , ASTM A276 , ASTM A312 , ASTM A314 , ASTM A403 , ASTM A473 , ASTM A478 , ASTM A479 , ASTM A511 , ASTM A554 , ASTM A580 , ASTM A632 , ASTM A688 , FED QQ-S-763 , FED QQ-S-766 , MIL SPEC MIL-S-23195 , MIL SPEC MIL-S-23196 , SAE 30304L , SAE J405 (30304L)

We stock, supply, export, wholesale Stainless Steel 304L Plate which are used in applications as mentioned below:

Food processing equipment, particularly in beer brewing, milk processing, and wine making

Kitchen benches, sinks, troughs, equipment, and appliances

Architectural trim and molding

Automotive and aerospace structural use

Construction material in large buildings

Chemical containers, including for transport

Heat exchangers

Nuts, bolts, screws, and other fasteners in the marine environment.

We can supply smaller quantities of Stainless Steel 304L Plate from our associated manufacturing unit in India.

 

If any requirements for Stainless Steel 304L Plate kindly do contact us.



Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Delivery Time: Immediate if ready stock
  • Packaging Details: Nhavasheva, Khopoli, Mumbai, India

    stainless-steel-304l-plate-1.4307-plates-uns-S30403-plates
Yes! I am interested

Stainless Steel 304L Round Bar

REQUEST CALLBACK

Stainless Steel 304L Round Bar
Approx. INR 210 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity400 Kilogram
FinishRolled, Forged, Annealed, Black, Bright, Peeled, Proof Machined
Third Party InspectionCan be done at an extra cost
Payment TermsStrictly against proforma invoice. Sorry no credits.
Payment ModePay TM, Cheque, RTGS, NEFT, T/T, Reputed Bank Irrevocable Confirmed Bank L/C.
Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch
BrandIndian, Imported (No MTC for imported material will be given). NABL laboratory reports possible.
Material GradeOutokumpu 4307, EN 1.4307, ASTM 304L, UNS S30403, JIS SUS 304L, ISO 4301-304-03-I, BS 304S11
ApplicationManufacturing, Construction, School/College Workshop, For manufacturing Flanges, Fittings, Valves, Couplings, Rings, Seals, Bolts, Nuts, Washers, Studs, Screws, Shafts, Disc, Hollow Bars, Fasteners
Single Piece Length3 meter, 6 meter

Jayant Impex Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offerStainless Steel 304L Round Bar.

Alloy 304L a T-300 series stainless steel austenitic, which has a minimum of 18% chromium and 8% nickel. Type 304L has maximum carbon of 0.030%. It is the standard “18/8 stainless” that is commonly found in pans and cooking tools. Alloys 304L is the most versatile and widely used alloy in the stainless steel family. Ideal for a wide variety of home and commercial applications, Alloys 304L exhibits excellent corrosion resistance and has a high ease of fabrication, outstanding formability. The austenitic stainless steels are also considered to be the most weldable of the high-alloy steels and can be welded by all fusion and resistance welding processes.

Stainless Steel 304L Round Bar can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

Size Specifications: Can offer Stainless Steel 304L Round Bar in size range of 3mm upto 400mm in diameter.

 

Stainless Steel 304L Round Bar as annealed condition physical properties are as below:

Tensile Min: 70 ksi

Yield Min: 25 ksi

Elongation Min: 40%

Hardness Max: 92 HRB

Different Designations of Stainless Steel 304L Round Bar:

Outokumpu 4307, EN 1.4307, ASTM 304L, UNS S30403, JIS SUS 304L, ISO 4301-304-03-I, BS 304S11, DIN 1.4307, NF Z7 CN 18-10, SS 2352, GB 00Cr19Ni10, KS STS 304L, GOST 08X18H11, UNI KG , UNI KW , UNI X 2 CrNi 18 11 , UNI X 3 CrNi 18 11, B.S. 304 S 12 , B.S. 304 S 14 , B.S. 304 S 22 , B.S. S. 536, AMS 5511 , AMS 5647 , ASME 8A182 , ASME SA213 , ASME SA240 , ASME SA249 , ASME SA312 , ASME SA403 , ASME SA479 , ASME SA688 , ASTM A167 , ASTM A182 , ASTM A213 , ASTM A240 , ASTM A249 , ASTM A276 , ASTM A312 , ASTM A314 , ASTM A403 , ASTM A473 , ASTM A478 , ASTM A479 , ASTM A511 , ASTM A554 , ASTM A580 , ASTM A632 , ASTM A688 , FED QQ-S-763 , FED QQ-S-766 , MIL SPEC MIL-S-23195 , MIL SPEC MIL-S-23196 , SAE 30304L , SAE J405 (30304L)

Corrosion Resistance properties of Stainless Steel 304L Round Bar:

Resistance to corrosion in oxidizing environments is a result of the 18 to 19% chromium that the 304 alloys contain.

Resistance to moderately aggressive organic acids is a result of the 9 to 11% nickel that the 304 alloys contain.

At times, alloy 304L may show a lower corrosion rate than the higher carbon Alloy 304; otherwise, the 304, 304L, and 304H may be considered to perform uniformly in most corrosive environments.

Alloy 304L is preferred for use in environments sufficiently corrosive to cause intergranular corrosion of welds and heat-affected zones on susceptible alloys.

We stock, supply, export, wholesale Stainless Steel 304L Round Bar which are used in applications as mentioned below:

Food processing equipment, particularly in beer brewing, milk processing, and wine making

Kitchen benches, sinks, troughs, equipment, and appliances

Architectural trim and molding

Automotive and aerospace structural use

Construction material in large buildings

Chemical containers, including for transport

Heat exchangers

Nuts, bolts, screws, and other fasteners in the marine environment

Dyeing industry

Woven or welded screens for mining, quarrying & water filtration

We can supply smaller quantities of Stainless Steel 304L Round Bar from our associated manufacturing unit in India.

If any requirements for Stainless Steel 304L Round Bar kindlydo contact us.



Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Delivery Time: Immediate if ready stock
  • Packaging Details: Nhavasheva, Khopoli, Mumbai, Indiastainless-steel-304l-round-bar-1.4307-round-bars-304l-bars
Yes! I am interested

Stainless Steel 304L Sheet

REQUEST CALLBACK

Stainless Steel 304L Sheet
Approx. INR 215 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity500 Kilogram
Chemical Composition(Chemistry) of Stainless Steel 304L SheetC: 0.03 max, Cr: 18 - 20, Fe: 66.34-74, Mn: 2 max, Ni: 8-10.5, P: 0.045 max, S: 0.03 max, Si:1 max
Surface Finish of Stainless Steel 304L SheetNo.1, No.3, No.4, No.8, 2B, BA, 2E, Scotch Brite, Embossing, Anti-fingerprint, Etching
Width of Stainless Steel 304L Sheet1000 mm, 1250 mm, 1270 mm and 1600 mm. Any other customized Width in ranges from 21 mm to 1600 mm
Length of Stainless Steel 304L Sheet2000 mm, 2500 mm, 5000 mm and 6000 mm. Any other customized Length in ranges from 400 mm to 6000 mm
Hot Rolled Stainless Steel 304L Sheet Thickness1.45mm upto 6mm
Cold Rolled Stainless Steel 304L Sheet Thickness0.40mm upto 5mm
Size (feet X feet)4 x 8
Thickness0-1 mm, 1-2 mm, 2-3 mm, 3-4 mm, 4-5 mm
BrandJindal, Imported (No MTC for imported material will be given). NABL laboratory reports possible.
Material GradeOutokumpu 4307, EN 1.4307, ASTM 304L, UNS S30403, JIS SUS 304L, ISO 4301-304-03-I, BS 304S11

Jayant Impex Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer Stainless Steel 304L Sheet.

304L stainless steel is an alloy of iron, further classified as an austenitic stainless steel. 304L is the AISI designation for this material. 1.4306 is the EN numeric designation. S30403 is the UNS number. Additionally, the EN chemical designation is X2CrNi18-9. And the British Standard (BS) designation is 304S12. 

Stainless Steel 304L Sheet can be avail as hot & cold rolled in annealed & pickled condition.

Size Specifications: Can offer Stainless Steel 304L Sheet in size range as mentioned below:

Hot Rolled Thickness: 1.45mm upto 6mm

Cold Rolled Thickness: 0.40mm upto 5mm

Width: 1000 mm, 1250 mm, 1270 mm and 1600 mm. Any other customized Width on HR/CR ranges from 21 mm to 1600 mm

Length: 2000 mm, 2500 mm, 5000 mm and 6000 mm. Any other customized Length on HR/CR ranges from 400 mm to 6000 mm

Surface Finishes that can be offered for Stainless Steel 304L Sheet are as follows:

No. 1: Hot rolled annealed, shot blasted and pickled

2B: Cold rolled annealed and pickled and skin passed

BA: Bright annealed finish; processed with bright heat treatment after cold rolling

No. 3: Cold rolled annealed and pickled and polished with 100 to 120 grit

No. 4: Cold rolled annealed and pickled and polished with 150 to 180 grit

Scotch Brite: Very fine hairline finish generated by polishing with rolls made out of scotch brite material

Embossing: Cold rolled annealed and pickled; given an appropriate embossed luster by embossing process

Anti-fingerprint: Cold rolled annealed and pickled and coated with Acrylic Solution

No. 8 / Mirror: Cold rolled annealed and pickled and polished to mirror finish

Etching: Cold rolled annealed and pickled and pattern surface

2E: Cold rolled, heat treated, mechanically descaled and pickled

 

Stainless Steel 304L Sheet as annealed condition physical properties are as below:

Tensile Min: 70000 Psi

Yield Min: 25000 Psi

Elongation Min: 40%

Hardness Max: 92 HRB

 

Different Designations of Stainless Steel 304L Sheet:

Outokumpu 4307, EN 1.4307, ASTM 304L, UNS S30403, JIS SUS 304L, ISO 4301-304-03-I, BS 304S11, DIN 1.4307, NF Z7 CN 18-10, SS 2352, GB 00Cr19Ni10, KS STS 304L, GOST 08X18H11, UNI KG , UNI KW , UNI X 2 CrNi 18 11 , UNI X 3 CrNi 18 11, B.S. 304 S 12 , B.S. 304 S 14 , B.S. 304 S 22 , B.S. S. 536, AMS 5511 , AMS 5647 , ASME 8A182 , ASME SA213 , ASME SA240 , ASME SA249 , ASME SA312 , ASME SA403 , ASME SA479 , ASME SA688 , ASTM A167 , ASTM A182 , ASTM A213 , ASTM A240 , ASTM A249 , ASTM A276 , ASTM A312 , ASTM A314 , ASTM A403 , ASTM A473 , ASTM A478 , ASTM A479 , ASTM A511 , ASTM A554 , ASTM A580 , ASTM A632 , ASTM A688 , FED QQ-S-763 , FED QQ-S-766 , MIL SPEC MIL-S-23195 , MIL SPEC MIL-S-23196 , SAE 30304L , SAE J405 (30304L)

We stock, supply, export, wholesale Stainless Steel 304L Sheet which are used in applications as mentioned below:

Food processing equipment, particularly in beer brewing, milk processing, and wine making, Kitchen benches, sinks, troughs, equipment, and appliances, Architectural trim and molding, etc.

We can supply smaller quantities of Stainless Steel 304L Sheet from our associated manufacturing unit in India.

If any requirements for Stainless Steel 304L Sheet kindly do contact us.



Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Delivery Time: Immediate if ready stock
  • Packaging Details: stainless-steel-304l-sheet-1.4307-sheets-uns-S30403-sheets



    eva, Khopoli, Mumbai, India
Yes! I am interested

Stainless Steel 310 Round Bar

REQUEST CALLBACK

Stainless Steel 310 Round Bar
Approx. INR 400 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity400 Kilogram
Chemical Composition(Chemistry) of Stainless Steel 310 Round BarC: 0.08max, Cr: 24-26, Cu: 0.5max, Mn: 2.0max, Ni: 19.022.0, P: 0.045max, S: 0.03max, Si: 0.75max
FinishRolled, Forged, Annealed, Black, Bright, Peeled, Proof Machined
Third Party InspectionCan be done at an extra cost
Payment TermsStrictly against proforma invoice. Sorry no credits.
Payment ModePay TM, Cheque, RTGS, NEFT, T/T, Reputed Bank Irrevocable Confirmed Bank L/C.
Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch
BrandIndian, Imported (No MTC for imported material will be given). NABL laboratory reports possible.
Material GradeOutokumpu 4845, EN 1.4845, ASTM 310S, UNS S31008, JIS SUS 310S, ISO 4845-310-08-E, DIN 1.4845
Single Piece Length3 meter, 6 meter

Jayant Impex Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer Stainless Steel 310 Round Bars.

Excellent resistance to oxidation under mildly cyclic conditions through 2000°F characterizes 310. Because of its high chromium and medium nickel contents, 310 has good resistance to sulfidation and other forms of hot corrosion. 310 is widely used in moderately carburizing atmospheres such as encountered in petrochemical environments. The more severely carburizing atmospheres of industrial heat treating furnaces require RA330 or RA333. 310 is not suggested for the severe thermal shock of repeated liquid quenching.

Often in many product forms, the grain size and carbon content can meet both the 310S and 310H requirements. 310 is often used at cryogenic temperatures, with excellent toughness to -450°F, and low magnetic permeability. 310 has a machinability rating of 42% relative to AISI B1112 steel. When using high speed steel tooling, this equates to about 70 surface feet per minute. Forming operations should be performed at room temperature whenever possible. Welding with AWS E310-15 electrodes or ER310 bare wire is suggested.

Steel 310 Round Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

Size Specifications: Can offer Stainless Steel 310 Round Bars in size range of 3mm upto 250mm in diameter.

Chemical composition of Stainless Steel 310 Round Bars:

Carbon: 0.25 max

Chromium: 24 - 26

Iron: Balance

Manganese: 2 max

Nickel: 19 - 22

Phosphorus: 0.045 max

Silicon: 1.5 max

Sulphur: 0.03 max

Stainless Steel 310 Round Bars as annealed condition physical properties are as below:

Ultimate Tensile Strength, psi: 75000

Yield Strength, psi: 30000

Elongation: 40%

Rockwell Hardness: 95

Different Standards of Stainless Steel 310 Round Bars:

Outokumpu 4845, EN 1.4845, ASTM 310S, UNS S31008, JIS SUS 310S, ISO 4845-310-08-E, DIN 1.4845, NF Z8 CN 25-20, SS 2361, GB 0Cr25Ni20, GOST 10X23H18, UNI X 16 CrNiSi 25 20 , UNI X 22 CrNi 25 20, B.S. 310 S 24, AMS 5694 , AMS 5695 , ASME SA182 , ASME SA213 , ASME SA249 , ASME SA312 , ASME SA358 , ASME SA403 , ASME SA409 , ASTM A167 , ASTM A182 , ASTM A213 , ASTM A249 , ASTM A276 , ASTM A312 , ASTM A314 , ASTM A358 , ASTM A403 , ASTM A409 , ASTM A473 , ASTM A511 , ASTM A580 , ASTM A632 , FED QQ-S-763 , FED QQ-S-766 , FED QQ-W-423 , FED STD-66 , MIL SPEC MIL-S-862 , SAE 30310 , SAE J405 (30310) , UNS S31000

We stock, supply, export, wholesale Stainless Steel 310 Round Bars which are used in applications as mentioned below:

Flare tips

Fluidized bed coal combustors

Radiant tubes

Tube hangers for petroleum refining and steam boilers

Coal gasifier internal components

Thermowells

Refractory anchor bolts

Burners, combustion chambers

Retorts, muffles, annealing covers

Food processing equipment

Cryogenic structures

We can supply smaller quantities of Stainless Steel 310 Round Bars from our associated manufacturing unit in India.

If any requirements for Stainless Steel 310 Round Bars kindlydo contact us.



Additional Information:

  • Item Code: stainless-steel-310-round-bar-ss-310-round-bars-310-round
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Nhavasheva, Khopoli, Mumbai, India
  • Delivery Time: Immediate if ready stock
Yes! I am interested

Stainless Steel 316 Plate

REQUEST CALLBACK

Stainless Steel 316 Plate
Approx. INR 250 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity500 Kilogram
Chemical Composition(Chemistry) of Stainless Steel 316 PlateC: 0.08 max, Mn: 2.00 max, Si: 1.00, Cr: 16.0-18.0, Ni: 10.0-14.0, P: 0.045 max, S: 0.03 max, Mo: 2.
Surface Finish of Stainless Steel 316 PlateNo.1, No.3, No.4, No.8, 2B, BA, 2E, Scotch Brite, Embossing, Anti-fingerprint, Etching
Width of Stainless Steel 316 Plate1000 mm, 1250 mm, 1270 mm and 1600 mm. Any other customized Width in ranges from 21 mm to 1600 mm
Length of Stainless Steel 316 Plate2000 mm, 2500 mm, 5000 mm and 6000 mm. Any other customized Length in ranges from 400 mm to 6000 mm
Size (feet X feet)4 x 8
Thickness>5 mm
BrandJindal, Imported (No MTC for imported material will be given). NABL laboratory reports possible.
Material GradeOutokumpu 4401, EN 1.4401, ASTM 316, UNS S31600, JIS SUS 316, ISO 4401-316-00-I, BS 316S31

Jayant Impex Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer Stainless Steel 316 Plates.

316 (UNS S31600) is an austenitic stainless steel containing molybdenum which is more corrosion resistant than the conventional 304/304L stainless steel. Alloy 316 (UNS S31600) is a chromium-nickel molybdenum austenitic stainless steel developed to provide improved corrosion resistance to Alloy 304/304L in moderately corrosive environments. It is often utilized in process streams containing chlorides or halides. The addition of molybdenum improves general corrosion and chloride pitting resistance. It also provides higher creep, stress-to-rupture and tensile strength at elevated temperatures.

Stainless Steel 316 Plates can be avail as hot rolled in annealed & pickled condition.

Surface Finishes that can be offered for Stainless Steel 316 Platess are as follows:

No. 1: Hot rolled annealed, shot blasted and pickled

2B: Cold rolled annealed and pickled and skin passed

BA: Bright annealed finish; processed with bright heat treatment after cold rolling

No. 3: Cold rolled annealed and pickled and polished with 100 to 120 grit

No. 4: Cold rolled annealed and pickled and polished with 150 to 180 grit

Scotch Brite: Very fine hairline finish generated by polishing with rolls made out of scotch brite material

Embossing: Cold rolled annealed and pickled; given an appropriate embossed luster by embossing process

Anti-fingerprint: Cold rolled annealed and pickled and coated with Acrylic Solution

No. 8 / Mirror: Cold rolled annealed and pickled and polished to mirror finish

Etching: Cold rolled annealed and pickled and pattern surface

2E: Cold rolled, heat treated, mechanically descaled and pickled

Stainless Steel 316 Plates resistance to corrosion properties:
Types 316 are more resistant to atmospheric and other mild types of corrosion than Types 302, 304 and 304L. In general, media that do not corrode Types 302, 304 and 304L, will not attack these molybdenum-containing grades. One known exception is highly oxidizing acids such as nitric acid to which the molybdenum-bearing stainless steels are less resistant.

Different Designations of Stainless Steel 316 Plates:

Outokumpu 4401, EN 1.4401, ASTM 316, UNS S31600, JIS SUS 316, ISO 4401-316-00-I, BS 316S31, DIN 1.4401, NF Z7 CND 17-11-02, SS 2347, GB 0Cr17Ni12Mo2, KS STS 316, UNI X 5 CrNIMo 17 12, B.S. 316 S 16 , B.S. 316 S 18, B.S. 316 S 25, B.S. 316 S 26, B.S. 316 S 30, B.S. 316 S 40, B.S. 316 S 41, B.S. En. 58 H, AMS 5524, AMS 5573, AMS 5648, AMS 5690, AMS 5691, ASME SA182, ASME SA193, ASME SA194, ASME SA213, ASME SA240, ASME SA249, ASME SA312, ASME SA320, ASME SA358, ASME SA376, ASME SA403, ASME SA409, ASME SA430, ASME SA479, ASME SA688, ASTM A167, ASTM A182, ASTM A193, ASTM A194, ASTM A213, ASTM A240, ASTM A249, ASTM A269, ASTM A276, ASTM A312, ASTM A313, ASTM A314, ASTM A320, ASTM A358, ASTM A368, ASTM A376, ASTM A403, ASTM A409, ASTM A430, ASTM A473, ASTM A478, ASTM A479, ASTM A580, FED QQ-S-763, FED QQ-S-766, FED QQ-W-423, MIL SPEC MIL-S-5059, MIL SPEC MIL-S-862, SAE 30316, SAE J405 (30316), UNS S31600

We stock, supply, export, wholesale Stainless Steel 316 Plates which are used in applications as mentioned below:

Chemical and Petrochemical Processing - pressure vessels, tanks, heat exchangers, piping systems, flanges, fittings, valves and pumps, Food and Beverage Processing, Marine, Medical, Petroleum Refining, Pharmaceutical Processing, Power Generation - nuclear, Pulp and Paper, Textiles, Water Treatment.

We can supply smaller quantities of Stainless Steel 316 Plates from our associated manufacturing unit in India.

If any requirements for Stainless Steel 316 Plates kindlydo contact us.



Additional Information:

  • Item Code: stainless-steel-316-plate-ss-316-plates-316-stainless-plates
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Nhavasheva, Khopoli, Mumbai, India
  • Delivery Time: Immediate if ready stock
Yes! I am interested

Stainless Steel 316 Round Bar

REQUEST CALLBACK

Stainless Steel 316 Round Bar
Approx. INR 250 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity500 Kilogram
Chemical Composition(Chemistry) of Stainless Steel 316 Round BarC: 0.08 max, Mn: 2.00 max, Si: 1.00, Cr: 16.0-18.0, Ni: 10.0-14.0, P: 0.045 max, S: 0.03 max, Mo: 2.
FinishRolled, Forged, Annealed, Black, Bright, Peeled, Proof Machined
Third Party InspectionCan be done at an extra cost
Payment TermsStrictly against proforma invoice. Sorry no credits.
Payment ModePay TM, Cheque, RTGS, NEFT, T/T, Reputed Bank Irrevocable Confirmed Bank L/C.
Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch
BrandIndian, Imported (No MTC for imported material will be given). NABL laboratory reports possible.
Material GradeOutokumpu 4401, EN 1.4401, ASTM 316, UNS S31600, JIS SUS 316, ISO 4401-316-00-I, BS 316S31
ApplicationManufacturing, Construction, School/College Workshop, For manufacturing Flanges, Fittings, Valves, Couplings, Rings, Seals, Bolts, Nuts, Washers, Studs, Screws, Shafts, Disc, Hollow Bars, Fasteners
Single Piece Length3 meter, 6 meter

Jayant Impex Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer Stainless Steel 316 Round Bar.

316 (UNS S31600) is a molybdenum-alloyed austenitic chromium-nickel steel with improved machinability. The grade is used for a wide range of industrial applications where steels of types ASTM 304/304L have insufficient corrosion resistance.

Stainless Steel 316 Round Bar can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

Size Specifications: Can offer Stainless Steel 316 Round Bar in size range of 3mm upto 400mm in diameter.

Chemical composition of Stainless Steel 316 Round Bar:

Element: Percentage

Chromium: 16.0 min.-18.0 max.

Nickel: 10.0 min.-14.0 max.

Molybdenum: 2.00 min.-3.00 max.

Carbon: 0.08

Manganese: 2.00

Phosphorus: 0.045

Sulfer: 0.03

Silicon: 0.75

Different Designations of Stainless Steel 316 Round Bar:

Outokumpu 4401, EN 1.4401, ASTM 316, UNS S31600, JIS SUS 316, ISO 4401-316-00-I, BS 316S31, DIN 1.4401, NF Z7 CND 17-11-02, SS 2347, GB 0Cr17Ni12Mo2, KS STS 316, UNI X 5 CrNIMo 17 12, B.S. 316 S 16 , B.S. 316 S 18, B.S. 316 S 25, B.S. 316 S 26, B.S. 316 S 30, B.S. 316 S 40, B.S. 316 S 41, B.S. En. 58 H, AMS 5524, AMS 5573, AMS 5648, AMS 5690, AMS 5691, ASME SA182, ASME SA193, ASME SA194, ASME SA213, ASME SA240, ASME SA249, ASME SA312, ASME SA320, ASME SA358, ASME SA376, ASME SA403, ASME SA409, ASME SA430, ASME SA479, ASME SA688, ASTM A167, ASTM A182, ASTM A193, ASTM A194, ASTM A213, ASTM A240, ASTM A249, ASTM A269, ASTM A276, ASTM A312, ASTM A313, ASTM A314, ASTM A320, ASTM A358, ASTM A368, ASTM A376, ASTM A403, ASTM A409, ASTM A430, ASTM A473, ASTM A478, ASTM A479, ASTM A580, FED QQ-S-763, FED QQ-S-766, FED QQ-W-423, MIL SPEC MIL-S-5059, MIL SPEC MIL-S-862, SAE 30316, SAE J405 (30316), UNS S31600

We stock, supply, export, wholesale Stainless Steel 316 Round Bar which are used in applications as mentioned below:

Flanges, Fittings, Valves, Couplings, Rings, Seals, Bolts, Nuts, Washers, Studs, Screws, Shafts, Disc, Hollow Bars, etc.

We can supply smaller quantities of Stainless Steel 316 Round Bar from our associated manufacturing unit in India.

If any requirements for Stainless Steel 316 Round Bar kindlydo contact us.



Additional Information:

  • Item Code: stainless-steel-316-round-bar-ss-316-round-bars-316-round
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Nhavasheva, Khopoli, Mumbai, India
  • Delivery Time: Immediate if ready stock
Yes! I am interested

Stainless Steel 316 Sheet

REQUEST CALLBACK

Stainless Steel 316 Sheet
Approx. INR 260 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity500 Kilogram
Surface Finish of Stainless Steel 316 SheetNo.1, No.3, No.4, No.8, 2B, BA, 2E, Scotch Brite, Embossing, Anti-fingerprint, Etching
Width of Stainless Steel 316 Sheet1000 mm, 1250 mm, 1270 mm and 1600 mm. Any other customized Width in ranges from 21 mm to 1600 mm
Length of Stainless Steel 316 Sheet2000 mm, 2500 mm, 5000 mm and 6000 mm. Any other customized Length in ranges from 400 mm to 6000 mm
Third Party InspectionCan be done at an extra cost
Payment TermsStrictly against proforma invoice. Sorry no credits.
Payment ModePay TM, Cheque, RTGS, NEFT, T/T, Reputed Bank Irrevocable Confirmed Bank L/C.
Hot Rolled Stainless Steel 316 Sheet Thickness1.45mm upto 6mm
Cold Rolled Stainless Steel 316 Sheet Thickness0.40mm upto 5mm
Size (feet X feet)4 x 8
Thickness0-1 mm, 1-2 mm, 2-3 mm, 3-4 mm, 4-5 mm
BrandJindal, Imported (No MTC for imported material will be given). NABL laboratory reports possible.
Material GradeOutokumpu 4401, EN 1.4401, ASTM 316, UNS S31600, JIS SUS 316, ISO 4401-316-00-I, BS 316S31

Jayant Impex Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer Stainless Steel 316 Sheets.

316 stainless steel sheet exhibits high strength, toughness and high temperature resistance. Due to higher level of molybdenum and nickel, it has higher corrosion and pitting resistance than 304 stainless sheet. Primarily a cold rolled product, it is available as hot rolled when required. 316 stainless steel alloys are used in applications that require resistance to salt water, acid and other highly corrosive materials.

Stainless Steel 316 Sheets can be avail as hot & cold rolled in annealed & pickled condition.

Size Specifications: Can offer Stainless Steel 316 Sheets in size range as mentioned below:

Hot Rolled Thickness: 1.45mm upto 6mm

Cold Rolled Thickness: 0.40mm upto 5mm

Width: 1000 mm, 1250 mm, 1270 mm and 1600 mm. Any other customized Width on HR/CR ranges from 21 mm to 1600 mm

Length: 2000 mm, 2500 mm, 5000 mm and 6000 mm. Any other customized Length on HR/CR ranges from 400 mm to 6000 mm

Surface Finishes that can be offered for Stainless Steel 316 Sheets are as follows:

No. 1: Hot rolled annealed, shot blasted and pickled

2B: Cold rolled annealed and pickled and skin passed

BA: Bright annealed finish; processed with bright heat treatment after cold rolling

No. 3: Cold rolled annealed and pickled and polished with 100 to 120 grit

No. 4: Cold rolled annealed and pickled and polished with 150 to 180 grit

Scotch Brite: Very fine hairline finish generated by polishing with rolls made out of scotch brite material

Embossing: Cold rolled annealed and pickled; given an appropriate embossed luster by embossing process

Anti-fingerprint: Cold rolled annealed and pickled and coated with Acrylic Solution

No. 8 / Mirror: Cold rolled annealed and pickled and polished to mirror finish

Etching: Cold rolled annealed and pickled and pattern surface

2E: Cold rolled, heat treated, mechanically descaled and pickled

Different Designations of Stainless Steel 316 Sheets:

Outokumpu 4401, EN 1.4401, ASTM 316, UNS S31600, JIS SUS 316, ISO 4401-316-00-I, BS 316S31, DIN 1.4401, NF Z7 CND 17-11-02, SS 2347, GB 0Cr17Ni12Mo2, KS STS 316, UNI X 5 CrNIMo 17 12, B.S. 316 S 16 , B.S. 316 S 18, B.S. 316 S 25, B.S. 316 S 26, B.S. 316 S 30, B.S. 316 S 40, B.S. 316 S 41, B.S. En. 58 H, AMS 5524, AMS 5573, AMS 5648, AMS 5690, AMS 5691, ASME SA182, ASME SA193, ASME SA194, ASME SA213, ASME SA240, ASME SA249, ASME SA312, ASME SA320, ASME SA358, ASME SA376, ASME SA403, ASME SA409, ASME SA430, ASME SA479, ASME SA688, ASTM A167, ASTM A182, ASTM A193, ASTM A194, ASTM A213, ASTM A240, ASTM A249, ASTM A269, ASTM A276, ASTM A312, ASTM A313, ASTM A314, ASTM A320, ASTM A358, ASTM A368, ASTM A376, ASTM A403, ASTM A409, ASTM A430, ASTM A473, ASTM A478, ASTM A479, ASTM A580, FED QQ-S-763, FED QQ-S-766, FED QQ-W-423, MIL SPEC MIL-S-5059, MIL SPEC MIL-S-862, SAE 30316, SAE J405 (30316), UNS S31600

We stock, supply, export, wholesale Stainless Steel 316 Sheets which are used in applications as mentioned below:

Oil & petroleum refining equipment

Aerospace Structures

Food processing equipment

Pulp and paper processing equipment

Soap and photographic handling equipment

Textile Industry Equipment

Architectural

Pharmaceutical processing equipment

We can supply smaller quantities of Stainless Steel 316 Sheets from our associated manufacturing unit in India.

If any requirements for Stainless Steel 316 Sheets kindlydo contact us.



Additional Information:

  • Item Code: stainless-steel-316-sheet-ss-316-sheets-316-stainless-sheets
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Nhavasheva, Khopoli, Mumbai, India
  • Delivery Time: Immediate if ready stock
Yes! I am interested

Stainless Steel 316L Round Bar

REQUEST CALLBACK

Stainless Steel 316L Round Bar
Approx. INR 265 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity400 Kilogram
Chemical Composition(Chemistry) of Stainless Steel 316L Round BarC: 0.03 max, Mn: 2.00 max, Si: 1.00, Cr: 16.0-18.0, Ni: 10.0-14.0, P: 0.045 max, S: 0.03 max, Mo: 2.
FinishRolled, Forged, Annealed, Black, Bright, Peeled, Proof Machined
Third Party InspectionCan be done at an extra cost
Payment TermsStrictly against proforma invoice. Sorry no credits.
Payment ModePay TM, Cheque, RTGS, NEFT, T/T, Reputed Bank Irrevocable Confirmed Bank L/C.
Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch
BrandIndian, Imported (No MTC for imported material will be given). NABL laboratory reports possible.
Material GradeOutokumpu 4404, EN 1.4404, ASTM 316L, UNS S31603, ISO 4404-316-00-I, BS 316S11, DIN 1.4404
ApplicationManufacturing, Construction, School/College Workshop, For manufacturing Flanges, Fittings, Valves, Couplings, Rings, Seals, Bolts, Nuts, Washers, Studs, Screws, Shafts, Disc, Hollow Bars, Fasteners
Single Piece Length3 meter, 6 meter

Jayant Impex Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer Stainless Steel 316L Round Bar.

Alloy 316/316L is molybdenum-bearing austenitic stainless steel. 316L is the lower carbon version of 316 and is immune from sensitization; therefore, it is very frequently used in heavy gauge welded components.

It is common practice for 316L to be dual certified as 316 and 316L. The low carbon chemistry of 316L combined with an addition of nitrogen enables 316L to meet the mechanical properties of 316.

Alloy 316/316L resists atmospheric corrosion, as well as, moderately oxidizing and reducing environments. It also resists corrosion in polluted marine atmospheres. The alloy has excellent resistance to intergranular corrosion in the as-welded condition. Alloy 316/316L has excellent strength and toughness at cryogenic temperatures.

Stainless Steel 316L Round Bar can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

Size Specifications: Can offer Stainless Steel 316L Round Bar in size range of 3mm upto 400mm in diameter.

Corrosion Resistance properties:

In most applications Alloy 316/316L has superior corrosion resistance to Alloy 304/304L. Process environments that do not corrode Alloy 304/304L will not attack this grade. One exception, however, is in highly oxidizing acids such as nitric acid where stainless steels containing molybdenum are less resistant. Alloy 316/316L performs well in sulfur containing service such as that encountered in the pulp and paper industry. The alloy can be used in high concentrations at temperatures up to 120°F (38°C).

Alloy 316/316L also has good resistance to pitting in phosphoric and acetic acid. It performs well in boiling 20% phosphoric acid. The alloy can also be used in the food and pharmaceutical process industries where it is utilized to handle hot organic and fatty acids in an effort to minimize product contamination.

Alloy 316/316L performs well in fresh water service even with high levels of chlorides. The alloy has excellent resistance to corrosion in marine environments under atmospheric conditions.

The higher molybdenum content of Alloy 316/316L assures it will have superior pitting resistance to Alloy 304/304L in applications involving chloride solutions, particularly in an oxidizing environment.

In most instances, the corrosion resistance of Alloys 316 and 316L will be roughly equal in most corrosive environments. 

Different Designations of Stainless Steel 316L Round Bar:

Outokumpu 4404, EN 1.4404, ASTM 316L, UNS S31603, ISO 4404-316-00-I, BS 316S11, DIN 1.4404, NF Z3 CND 17-11-02, SS 2348, GB 00Cr17Ni14Mo2, KS STS 316L, GOST 03X17H14M2, UNI X 2 CrNiMo 17 12, B.S. 316 S 12, B.S. 316 S 14, B.S. 316 S 22, B.S. 316 S 24, B.S. 316 S 29, B.S. 316 S 30, B.S. 316 S 31, B.S. 316 S 37, B.S. 316 S 82, B.S. S.537, AMS 5507, AMS 5653, ASME SA182, ASME SA213, ASME SA240, ASME SA249, ASME SA312, ASME SA403, ASME SA479, ASME SA688, ASTM A167, ASTM A182, ASTM A213, ASTM A240, ASTM A249, ASTM A269, ASTM A276, ASTM A312, ASTM A314, ASTM A403, ASTM A473, ASTM A478, ASTM A479, ASTM A511, ASTM A554, ASTM A580, ASTM A632, ASTM A688, FED QQ-S-763, FED QQ-S-766, MIL SPEC MIL-S-862, SAE 30316L, SAE J405 (30316L), UNS S31603

We stock, supply, export, wholesale Stainless Steel 316L Round Bar which are used in applications as mentioned below:

Flanges, Fittings, Valves, Couplings, Rings, Seals, Bolts, Nuts, Washers, Studs, Screws, Shafts, Disc, Hollow Bars, etc.

We can supply smaller quantities of Stainless Steel 316L Round Bar from our associated manufacturing unit in India.

If any requirements for Stainless Steel 316L Round Bar kindlydo contact us.



Additional Information:

  • Item Code: stainless-steel-316l-round-bar-ss-316l-round-bars-316l-round
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Nhavasheva, Khopoli, Mumbai, India
  • Delivery Time: Immediate if ready stock
Yes! I am interested

Stainless Steel 321 Round Bar

REQUEST CALLBACK

Stainless Steel 321 Round Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel 410 Round Bar

REQUEST CALLBACK

Stainless Steel 410 Round Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Bars

REQUEST CALLBACK

Stainless Steel Bars
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Bright Bar

REQUEST CALLBACK

Stainless Steel Bright Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Checkered Sheet

REQUEST CALLBACK

Stainless Steel Checkered Sheet
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Chequered Plates

REQUEST CALLBACK

Stainless Steel Chequered Plates
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Coloured Sheet

REQUEST CALLBACK

Stainless Steel Coloured Sheet
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stamping, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with PVC  coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchanges, University student projects, etc.

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc.

 



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Decorative Sheets

REQUEST CALLBACK

Stainless Steel Decorative Sheets
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Equal Angle Bar

REQUEST CALLBACK

Stainless Steel Equal Angle Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Etching Sheets

REQUEST CALLBACK

Stainless Steel Etching Sheets
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Flat Bars

REQUEST CALLBACK

Stainless Steel Flat Bars
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Forged Round Bar

REQUEST CALLBACK

Stainless Steel Forged Round Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Hexagon Bar

REQUEST CALLBACK

Stainless Steel Hexagon Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Hollow Bar

REQUEST CALLBACK

Stainless Steel Hollow Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Plate

REQUEST CALLBACK

Stainless Steel Plate
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Rods

REQUEST CALLBACK

Stainless Steel Rods
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Round Bar

REQUEST CALLBACK

Stainless Steel Round Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc.

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Round Bars 304L

REQUEST CALLBACK

Stainless Steel Round Bars 304L
Approx. INR 215 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity800 Kilogram
Chemical Composition(Chemistry) of Stainless Steel Round Bars 304LC: 0.03 max, Cr: 18 - 20, Fe: 66.34-74, Mn: 2 max, Ni: 8-10.5, P: 0.045 max, S: 0.03 max, Si:1 max
FinishRolled, Forged, Annealed, Black, Bright, Peeled, Proof Machined
Third Party InspectionCan be done at an extra cost
Payment TermsStrictly against proforma invoice. Sorry no credits.
Payment ModePay TM, Cheque, RTGS, NEFT, T/T, Reputed Bank Irrevocable Confirmed Bank L/C.
Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch
BrandIndian, Imported (No MTC for imported material will be given). NABL laboratory reports possible.
Material GradeOutokumpu 4307, EN 1.4307, ASTM 304L, UNS S30403, JIS SUS 304L, ISO 4301-304-03-I, BS 304S11
ApplicationManufacturing, Construction, School/College Workshop, For manufacturing Flanges, Fittings, Valves, Couplings, Rings, Seals, Bolts, Nuts, Washers, Studs, Screws, Shafts, Disc, Hollow Bars, Fasteners
Single Piece Length3 meter, 6 meter

Jayant Impex Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer Stainless Steel Round Bars 304L.

304L (UNS S30403) are austenitic alloys of stainless steel bars. The L in 304/L refers to a lower carbon content to allow for greater corrosion protection when welding. These alloys are the most familiar and most frequently used alloys in the stainless steel family.

Stainless Steel Round Bars 304L can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

Size Specifications: Can offer Stainless Steel Round Bars 304L in size range of 3mm upto 400mm in diameter.

Chemical composition of Stainless Steel Round Bars 304L:

Element: Percentage

Iron (Fe): 66.5 - 74%

Carbon (C): 0.03% max

Chrome (Cr): 18 - 20%

Manganese (Mn): 2% max

Nickel (Ni): 8 - 10.5%

Phosphorus (P): 0.045% max

Sulphur (S): 0.03% max

Silicon (Si): 1% max

Stainless Steel Round Bars 304L as annealed condition physical properties are as below:

Tensile Min: 70000 Psi

Yield Min: 25000 Psi

Elongation Min: 40%

Hardness Max: 92 HRB

Different Designations of Stainless Steel Round Bars 304L:

Outokumpu 4307, EN 1.4307, ASTM 304L, UNS S30403, JIS SUS 304L, ISO 4301-304-03-I, BS 304S11, DIN 1.4307, NF Z7 CN 18-10, SS 2352, GB 00Cr19Ni10, KS STS 304L, GOST 08X18H11, UNI KG , UNI KW , UNI X 2 CrNi 18 11 , UNI X 3 CrNi 18 11, B.S. 304 S 12 , B.S. 304 S 14 , B.S. 304 S 22 , B.S. S. 536, AMS 5511 , AMS 5647 , ASME 8A182 , ASME SA213 , ASME SA240 , ASME SA249 , ASME SA312 , ASME SA403 , ASME SA479 , ASME SA688 , ASTM A167 , ASTM A182 , ASTM A213 , ASTM A240 , ASTM A249 , ASTM A276 , ASTM A312 , ASTM A314 , ASTM A403 , ASTM A473 , ASTM A478 , ASTM A479 , ASTM A511 , ASTM A554 , ASTM A580 , ASTM A632 , ASTM A688 , FED QQ-S-763 , FED QQ-S-766 , MIL SPEC MIL-S-23195 , MIL SPEC MIL-S-23196 , SAE 30304L , SAE J405 (30304L)

We stock, supply, export, wholesale Stainless Steel 304L Round Bar which are used in applications as mentioned below:

Food processing equipment, particularly in beer brewing, milk processing, and wine making

Kitchen benches, sinks, troughs, equipment, and appliances

Architectural trim and molding

Automotive and aerospace structural use

Construction material in large buildings

Chemical containers, including for transport

Heat exchangers

Nuts, bolts, screws, and other fasteners in the marine environment

We can supply smaller quantities of Stainless Steel Round Bars 304L from our associated manufacturing unit in India.

If any requirements for Stainless Steel Round Bars 304L kindlydo contact us.



Additional Information:

  • Item Code: stainless-steel-round-bars-304l-X2CrNi18-11-round-bars
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Nhavasheva, Khopoli, Mumbai, India
  • Delivery Time: Immediate if ready stock
Yes! I am interested

Stainless Steel Round Bars 316Ti

REQUEST CALLBACK

Stainless Steel Round Bars 316Ti
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc.

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Round Bars 904L

REQUEST CALLBACK

Stainless Steel Round Bars 904L
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Sheets

REQUEST CALLBACK

Stainless Steel Sheets
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Square Bar

REQUEST CALLBACK

Stainless Steel Square Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Threaded Rods

REQUEST CALLBACK

Stainless Steel Threaded Rods
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc.

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Stainless Steel Wire Rod

REQUEST CALLBACK

Stainless Steel Wire Rod
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Steel Bars

REQUEST CALLBACK

Steel Bars
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Steel Bright Bar

REQUEST CALLBACK

Steel Bright Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Steel Decking Sheet

REQUEST CALLBACK

Steel Decking Sheet
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Steel Plates

REQUEST CALLBACK

Steel Plates
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Steel Rods

REQUEST CALLBACK

Steel Rods
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Steel Round Bars

REQUEST CALLBACK

Steel Round Bars
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Steel Sheets

REQUEST CALLBACK

Steel Sheets
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc.

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Steel Threaded Rod

REQUEST CALLBACK

Steel Threaded Rod
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Steel Wire Rod

REQUEST CALLBACK

Steel Wire Rod
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc.

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Tempered Steel Plate

REQUEST CALLBACK

Tempered Steel Plate
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc.

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Unequal Angle Bar

REQUEST CALLBACK

Unequal Angle Bar
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer vide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

Wire Rod Coils

REQUEST CALLBACK

Wire Rod Coils
Approx. INR 2500 / Piece
Get Best Quote

Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies  can offer wide range of Steel Bars, Rods, Plates Sheets from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc. 

Specifications: Can offer Plates Sheets with pvc coated, matt finish, No.1, No.2, No.3, No.4, BA, 2B, etc. finish depending on material grades.

Can offer Steel Bars rods as continuous cast (concast), rolled, forged in normalized, annealed, spherodized annealed, quenched (hardened) tempered condition with black or bright (peeled or proof machined) finish.

 

Size Dimensions: Client can avail Plates Sheets of thickness sizes ranging between 0.5mm upto 60mm depending on material grades technical specifications.

Client can avail Steel Bars rods of diameter sizes ranging between 4mm upto 600mm for flat bars thickness ranging from 4mm upto 400mm depending on material grades technical specifications which can be used for manufacturing of fasteners, hollow bars, forged seamless ring, forged flanges, tube pipe fittings, bolts, screws, round hexagonal nuts, washer, forging components, dies, etc. 

We stock, supply, export, wholesale Steel Bars, Rods, Plates Sheets which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.

 

We can supply smaller quantities of Steel Bars, Rods, Plates Sheets from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, etc. 

 

If any requirements for Steel Bars, Rods, Plates Sheets kindly do contact us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
Yes! I am interested

 
X


Call Us:  +91-8042909029
Jayant Impex Private Limited
Ajit M. Mehta (Director)
Shop no. 4, Deccan bank bldg, 215/217 R.R.Mohan Roy Road, Mumbai 400004(India) , Tank Road,
Mumbai - 400004, Maharashtra, India
Contact via E-mail
Contact via SMS


Home  |   About Us   |  Our Products  |  Site Map  |   Contact Us   |   Mobile Site

© Jayant Impex Private Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Jayant Impex Private Limited